mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-11-14 21:58:44 +08:00
172 lines
5.8 KiB
Markdown
172 lines
5.8 KiB
Markdown
<a id="Top"></a>
|
|
|
|
# Compilation instructions
|
|
|
|
# Table of Contents
|
|
- [Compilation instructions](#compilation-instructions)
|
|
- [Table of Contents](#table-of-contents)
|
|
- [Tuning compilation parameters](#tuning-compilation-parameters)
|
|
- [Compile for Proxmark3 RDV4](#compile-for-proxmark3-rdv4)
|
|
- [Compile for generic Proxmark3 platforms](#compile-for-generic-proxmark3-platforms)
|
|
- [Get the latest commits](#get-the-latest-commits)
|
|
- [Clean and compile everything](#clean-and-compile-everything)
|
|
- [if you got an error](#if-you-got-an-error)
|
|
- [Install](#install)
|
|
- [Flash the BOOTROM & FULLIMAGE](#flash-the-bootrom--fullimage)
|
|
- [The button trick](#the-button-trick)
|
|
- [flasher stops and warns you about firmware image](#flasher-stops-and-warns-you-about-firmware-image)
|
|
- [Run the client](#run-the-client)
|
|
- [Next steps](#next-steps)
|
|
|
|
|
|
|
|
## Tuning compilation parameters
|
|
^[Top](#top)
|
|
|
|
The client and the Proxmark3 firmware should always be in sync.
|
|
Nevertheless, the firmware can be tuned depending on the Proxmark3 platform and options.
|
|
|
|
Indeed, the Iceman fork can be used on other Proxmark3 hardware platforms as well.
|
|
|
|
Via some definitions, you can adjust the firmware for a given platform, but also to add features like the support of the Blue Shark add-on or to select which standalone mode to embed. To learn how to adjust the firmware, please read [Advanced compilation parameters](/doc/md/Use_of_Proxmark/4_Advanced-compilation-parameters.md).
|
|
|
|
### Compile for Proxmark3 RDV4
|
|
^[Top](#top)
|
|
|
|
The repo defaults for compiling a firmware and client suitable for Proxmark3 RDV4.
|
|
|
|
### Compile for generic Proxmark3 platforms
|
|
^[Top](#top)
|
|
|
|
In order to build this repo for generic Proxmark3 platforms we urge you to read [Advanced compilation parameters](/doc/md/Use_of_Proxmark/4_Advanced-compilation-parameters.md)
|
|
|
|
|
|
## Get the latest commits
|
|
^[Top](#top)
|
|
|
|
```sh
|
|
cd proxmark3
|
|
git pull
|
|
```
|
|
|
|
## Clean and compile everything
|
|
^[Top](#top)
|
|
|
|
```sh
|
|
make clean && make -j
|
|
```
|
|
|
|
### if you got an error
|
|
^[Top](#top)
|
|
|
|
Read the [troubleshooting guide](/doc/md/Installation_Instructions/Troubleshooting.md),
|
|
|
|
For instance, on WSl-1 you usually get the `libQt5Core.so.5 not found` message
|
|
[solution](/doc/md/Installation_Instructions/Troubleshooting.md#libQt5Coreso5-not-found)
|
|
|
|
|
|
## Install
|
|
^[Top](#top)
|
|
|
|
This is an optional step. If you do
|
|
|
|
```sh
|
|
sudo make install
|
|
```
|
|
|
|
Then the required files will be installed on your system, by default in `/usr/local/bin` and `/usr/local/share/proxmark3`.
|
|
Maintainers can read [this doc](../Development/Maintainers.md) to learn how to modify installation paths via `DESTDIR` and `PREFIX` Makefile variables.
|
|
|
|
The commands given in the documentation assume you did the installation step. If you didn't, you've to adjust the commands paths and files paths accordingly,
|
|
e.g. calling `./pm3` or `client/proxmark3` instead of just `pm3` or `proxmark3`.
|
|
|
|
## Flash the BOOTROM & FULLIMAGE
|
|
^[Top](#top)
|
|
|
|
In most cases, you can run the following script which try to auto-detect the port to use, on several OS:
|
|
|
|
```sh
|
|
pm3-flash-all
|
|
```
|
|
|
|
For the other cases, specify the port by yourself. For example, for a Proxmark3 connected via USB under Linux (adjust the port for your OS):
|
|
|
|
```sh
|
|
proxmark3 /dev/ttyACM0 --flash --unlock-bootloader --image bootrom.elf --image fullimage.elf
|
|
```
|
|
|
|
The firmware files will be searched in the expected locations (installed files, working repo files, user folder, etc.). You can also specify their location:
|
|
|
|
```sh
|
|
pm3-flash -b /tmp/my-bootrom.elf /tmp/my-fullimage.elf
|
|
```
|
|
|
|
or
|
|
|
|
```sh
|
|
proxmark3 /dev/ttyACM0 --flash --unlock-bootloader --image /tmp/my-bootrom.elf --image /tmp/my-fullimage.elf
|
|
```
|
|
|
|
### The button trick
|
|
^[Top](#top)
|
|
|
|
If the flasher can't detect your Proxmark3 (especially the very first time you flash a new device), force it to enter the bootloader mode as following:
|
|
|
|
With your Proxmark3 unplugged from your machine, press and hold the button on your Proxmark3 as you plug it into a USB port.
|
|
You can release the button, two of the four LEDs should stay on.
|
|
You're in bootloader mode, ready for the next step.
|
|
|
|
In case the two LEDs don't stay on when you're releasing the button, you've a very old bootloader, start over and keep the button pressed during the whole flashing procedure.
|
|
|
|
|
|
## flasher stops and warns you about firmware image
|
|
^[Top](#top)
|
|
|
|
The Proxmark3 software and firmware is connected tightly. The strong recommendation is to use the client with a Proxmark3 device flashed with firmware images from same source version.
|
|
In the flash process you might get this message because the firmware images is downloaded or distributed and you have compiled your own client from a different source version.
|
|
To minimize the risks the flasher warns about it and stops.
|
|
|
|
```
|
|
Make sure to flash a correct and up-to-date version
|
|
You can force flashing this firmware by using the option '--force'
|
|
```
|
|
|
|
If you know what you are doing and want to proceed despite the mismatch, you need to add the `--force` param in order to continue flashing.
|
|
|
|
```sh
|
|
pm3-flash-all --force
|
|
```
|
|
|
|
|
|
|
|
## Run the client
|
|
^[Top](#top)
|
|
|
|
In most cases, you can run the script `pm3` which try to auto-detect the port to use, on several OS.
|
|
```sh
|
|
./pm3
|
|
```
|
|
|
|
For the other cases, specify the port by yourself. For example, for a Proxmark3 connected via USB under Linux:
|
|
|
|
Here, for example, for a Proxmark3 connected via USB under Linux (adjust the port for your OS):
|
|
|
|
```sh
|
|
proxmark3 /dev/ttyACM0
|
|
```
|
|
|
|
or from the local repo
|
|
|
|
```sh
|
|
client/proxmark3 /dev/ttyACM0
|
|
```
|
|
|
|
## Next steps
|
|
^[Top](#top)
|
|
|
|
For the next steps, please read the following pages:
|
|
|
|
* [Validating proxmark client functionality](/doc/md/Use_of_Proxmark/1_Validation.md)
|
|
* [First Use and Verification](/doc/md/Use_of_Proxmark/2_Configuration-and-Verification.md)
|
|
* [Commands & Features](/doc/md/Use_of_Proxmark/3_Commands-and-Features.md)
|
|
|