mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-09-23 16:56:15 +08:00
93 lines
2.8 KiB
Markdown
93 lines
2.8 KiB
Markdown
# Compilation instructions
|
|
|
|
## Tuning compilation parameters
|
|
|
|
The client and the Proxmark3 firmware should always be in sync.
|
|
Nevertheless, the firmware can be tuned depending on the Proxmark3 platform and options.
|
|
|
|
Indeed, the RRG/Iceman fork can be used on other Proxmark3 hardware platforms as well.
|
|
|
|
Via some definitions, you can adjust the firmware for a given platform, but also to add features like the support of the Blue Shark add-on or to select which standalone mode to embed.
|
|
|
|
To learn how to adjust the firmware, please read [Advanced compilation parameters](/doc/md/Use_of_Proxmark/4_Advanced-compilation-parameters.md).
|
|
|
|
## Get the latest commits
|
|
|
|
```sh
|
|
cd proxmark3
|
|
git pull
|
|
```
|
|
|
|
## Clean and compile everything
|
|
|
|
```sh
|
|
make clean && make all
|
|
```
|
|
|
|
## Install
|
|
|
|
This is an optional step. If you do
|
|
|
|
```sh
|
|
sudo make install
|
|
```
|
|
|
|
Then the required files will be installed on your system, by default in `/usr/local/bin` and `/usr/local/share/proxmark3`.
|
|
Maintainers can read [this doc](../Development/Maintainers.md) to learn how to modify installation paths via `DESTDIR` and `PREFIX` Makefile variables.
|
|
|
|
The commands given in the documentation assume you did the installation step. If you didn't, you've to adjust the commands paths and files paths accordingly,
|
|
e.g. calling `./pm3` or `client/proxmark3` instead of just `pm3` or `proxmark3`.
|
|
|
|
## Flash the BOOTROM & FULLIMAGE
|
|
|
|
In most cases, you can run the following script which try to auto-detect the port to use, on several OS:
|
|
|
|
```sh
|
|
pm3-flash-all
|
|
```
|
|
|
|
For the other cases, specify the port by yourself. For example, for a Proxmark3 connected via USB under Linux (adjust the port for your OS):
|
|
|
|
```sh
|
|
proxmark3 /dev/ttyACM0 --flash --unlock-bootloader --image bootrom.elf --image fullimage.elf
|
|
```
|
|
|
|
The firmware files will be searched in the expected locations (installed files, working repo files, user folder, etc.). You can also specify their location:
|
|
|
|
```sh
|
|
pm3-flash -b /tmp/my-bootrom.elf /tmp/my-fullimage.elf
|
|
```
|
|
|
|
or
|
|
|
|
```sh
|
|
proxmark3 /dev/ttyACM0 --flash --unlock-bootloader --image /tmp/my-bootrom.elf --image /tmp/my-fullimage.elf
|
|
```
|
|
|
|
## Run the client
|
|
|
|
In most cases, you can run the script `pm3` which try to auto-detect the port to use, on several OS.
|
|
|
|
For the other cases, specify the port by yourself. For example, for a Proxmark3 connected via USB under Linux:
|
|
|
|
Here, for example, for a Proxmark3 connected via USB under Linux (adjust the port for your OS):
|
|
|
|
```sh
|
|
proxmark3 /dev/ttyACM0
|
|
```
|
|
|
|
or from the local repo
|
|
|
|
```sh
|
|
client/proxmark3 /dev/ttyACM0
|
|
```
|
|
|
|
## Next steps
|
|
|
|
For the next steps, please read the following pages:
|
|
|
|
* [Validating proxmark client functionality](/doc/md/Use_of_Proxmark/1_Validation.md)
|
|
* [First Use and Verification](/doc/md/Use_of_Proxmark/2_Configuration-and-Verification.md)
|
|
* [Commands & Features](/doc/md/Use_of_Proxmark/3_Commands-and-Features.md)
|
|
|