proxmark3/Installation_Instructions/Mac-OS-X-Homebrew-Installation-Instructions.md
Chrissy Morgan e3a82cd849 Restructure of RRG repo
Added installtion videos.
Re-wrote installtion instructions
2019-04-07 23:38:00 +01:00

1.6 KiB

Homebrew (Mac OS X)

These instructions comes from @Chrisfu, where I got the proxmark3.rb scriptfile from. Further questions about Mac & Homebrew, contact @Chrisfu (https://github.com/chrisfu/)

  1. Install homebrew if you haven't yet already done so: http://brew.sh/

  2. Tap this repo: brew tap RfidResearchGroup/proxmark3

  3. Install Proxmark3: brew install proxmark3 for stable release or brew install --HEAD proxmark3 for latest non-stable from GitHub.

Upgrading HomeBrew tap formula

This method is useful for those looking to run bleeding-edge versions of iceman's client. Keep this in mind when attempting to update your HomeBrew tap formula as this procedure could easily cause a build to break if an update is unstable on macOS.

Tested on macOS High Sierra 10.13.2

Note: This assumes you have already installed iceman's fork from HomeBrew as mentioned above

  1. Force HomeBrew to pull the latest source from github brew upgrade --fetch-HEAD RfidResearchGroup/proxmark3

  2. Flash the bootloader & fullimage.elf

  • With your Proxmark3 unplugged from your machine, press and hold the button on your Proxmark 3 as you plug it into a USB port. Continue to hold the button until after this step is complete and the proxmark3-flasher command outputs "Have a nice day!"* $ sudo proxmark3-flasher /dev/tty.usbmodem881 -b /usr/local/Cellar/proxmark3/HEAD-6a710ef/share/firmware/bootrom.elf /usr/local/Cellar/proxmark3/HEAD-6a710ef/share/firmware/fullimage.elf

$ sudo proxmark3-flasher /dev/tty.usbmodem881

  1. Enjoy the update