proxmark3/Installation_Instructions/Kali-Installation-Instructions.md

Kali Installation

Kali users usually must kill their modem manager in order for the proxmark3 to enumerate properly.

sudo apt remove modemmanager

Video Installation guide

---

Manual Install

First what we want to do is get an update for the system. If you need to upgrade do this before the install An upgrade was carried out prior to following these instructions.

Update

sudo apt-get update

Requirements.

sudo apt-get install p7zip git build-essential libreadline5 libreadline-dev \
libusb-0.1-4 libusb-dev libqt4-dev perl pkg-config wget libncurses5-dev gcc-arm-none-eabi

If you do get any issues during the requirements installation, I have found it to help using the synaptic package manager.

Clone Fork

git clone https://github.com/RfidResearchGroup/proxmark3.git

Change directory into the directory created

cd proxmark3

Get the latest commits

git pull

Remove Modem Manager

sudo apt remove modemmanager

Reboot Kali

 reboot

Change directory back to proxmark3

cd proxmark3

Clean and Compile

Clean and complete compile

 make clean && make all

Check Connection

Once this is complete run the following comands to make sure the proxmark is being picked up by your computer.

sudo dmesg | grep -i usb

It should show up as a CDC device:

[10416.555108] usb 2-1.2: Product: PM3
[10416.555111] usb 2-1.2: Manufacturer: proxmark.org
[10416.555871] cdc_acm 2-1.2:1.0: ttyACM0: USB ACM device

Flash the BOOTROM & FULLIMAGE

client/flasher /dev/ttyACM0 -b bootrom/obj/bootrom.elf armsrc/obj/fullimage.elf

Note

If you have any issues connecting or during the flash, follow the steps listed here and use the command sudo apt remove modemmanager

Change into the client folder

cd client

Run the client

./proxmark3 /dev/ttyACM0

Run a test command

hw tune