mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-09-21 15:56:21 +08:00
87 lines
2.5 KiB
Markdown
87 lines
2.5 KiB
Markdown
## 1. Validating proxmark client functionality
|
|
|
|
If all went well you should get some information about the firmware and memory usage as well as the prompt, something like this.
|
|
|
|
```
|
|
|
|
██████╗ ███╗ ███╗ ████╗ ...iceman fork
|
|
██╔══██╗████╗ ████║ ══█║ ...dedicated to RDV40
|
|
██████╔╝██╔████╔██║ ████╔╝
|
|
██╔═══╝ ██║╚██╔╝██║ ══█║ iceman@icesql.net
|
|
██║ ██║ ╚═╝ ██║ ████╔╝ https://github.com/rfidresearchgroup/proxmark3/
|
|
╚═╝ ╚═╝ ╚═╝ ╚═══╝ pre-release v4.0
|
|
|
|
Support iceman on patreon, https://www.patreon.com/iceman1001/
|
|
|
|
|
|
[=] Using UART port /dev/pm3-0
|
|
[=] Communicating with PM3 over USB-CDC
|
|
|
|
[ Proxmark3 RFID instrument ]
|
|
|
|
|
|
[ CLIENT ]
|
|
client: RRG/Iceman
|
|
|
|
[ PROXMARK RDV4 ]
|
|
external flash: present
|
|
smartcard reader: present
|
|
|
|
[ PROXMARK RDV4 Extras ]
|
|
FPC USART for BT add-on support: absent
|
|
|
|
[ ARM ]
|
|
bootrom: RRG/Iceman/master/5ab9716e 2019-05-01 11:02:08
|
|
os: RRG/Iceman/master/6b5a0f83 2019-05-04 23:57:47
|
|
|
|
[ FPGA ]
|
|
LF image built for 2s30vq100 on 2019/ 4/18 at 9:35:32
|
|
HF image built for 2s30vq100 on 2018/ 9/ 3 at 21:40:23
|
|
|
|
[ Hardware ]
|
|
--= uC: AT91SAM7S512 Rev B
|
|
--= Embedded Processor: ARM7TDMI
|
|
--= Nonvolatile Program Memory Size: 512K bytes, Used: 250913 bytes (48%) Free: 273375 bytes (52%)
|
|
--= Second Nonvolatile Program Memory Size: None
|
|
--= Internal SRAM Size: 64K bytes
|
|
--= Architecture Identifier: AT91SAM7Sxx Series
|
|
--= Nonvolatile Program Memory Type: Embedded Flash Memory
|
|
|
|
|
|
pm3 -->
|
|
```
|
|
|
|
This `pm3 --> ` is the Proxmark3 interactive prompt.
|
|
|
|
|
|
### To get interactive help
|
|
|
|
For basic help type `help`. Or for help on a set of sub commands type the command followed by `help`. For example `hf mf help`.
|
|
|
|
### First tests
|
|
|
|
These commands will return some info about your Proxmark software and hardware status.
|
|
```
|
|
pm3 --> hw status
|
|
pm3 --> hw version
|
|
pm3 --> hw tune
|
|
```
|
|
|
|
You are now ready to use your newly flashed proxmark3 device. Many commands uses the `h` parameter to show a help text.
|
|
|
|
### To quit the client
|
|
```
|
|
pm3 --> quit
|
|
```
|
|
or simple press `CTRL-D`.
|
|
|
|
## Next steps
|
|
|
|
Some configuration steps are still needed.
|
|
|
|
For the next steps, please read the following pages:
|
|
|
|
* [First Use and Verification](/doc/md/Use_of_Proxmark/2_Configuration-and-Verification.md)
|
|
* [Commands & Features](/doc/md/Use_of_Proxmark/3_Commands-and-Features.md)
|
|
|