proxmark3/doc/md/Use_of_Proxmark/0_Compilation-Instructions.md
2019-07-12 01:55:36 +02:00

1.7 KiB

Compilation instructions

Tuning compilation parameters

The client and the Proxmark3 firmware should always be in sync. Nevertheless, the firmware can be tuned depending on the Proxmark3 platform and options.

Indeed, the RRG/Iceman fork can be used on other Proxmark3 hardware platforms as well.

Via some definitions, you can adjust the firmware for a given platform, but also to add features like the support of the Blue Shark add-on or to select which standalone mode to embed.

To learn how to adjust the firmware, please read Advanced compilation parameters.

Get the latest commits

cd proxmark3
git pull

Clean and compile everything

make clean && make all

Flash the BOOTROM & FULLIMAGE

In most cases, you can run the script flash-all.sh which try to auto-detect the port to use, on several OS.

For the other cases, specify the port by yourself. For example, for a Proxmark3 connected via USB under Linux:

client/flasher /dev/ttyACM0 -b bootrom/obj/bootrom.elf armsrc/obj/fullimage.elf

Run the client

In most cases, you can run the script proxmark3.sh which try to auto-detect the port to use, on several OS.

For the other cases, specify the port by yourself. For example, for a Proxmark3 connected via USB under Linux:

Here, for example, for a Proxmark3 connected via USB under Linux:

cd client
./proxmark3 /dev/ttyACM0

Next steps

For the next steps, please read the following pages: