mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-09-23 00:37:14 +08:00
87 lines
4.1 KiB
Markdown
87 lines
4.1 KiB
Markdown
# Advanced compilation parameters
|
|
|
|
The client and the Proxmark3 firmware should always be in sync.
|
|
Nevertheless, the firmware can be tuned depending on the Proxmark3 platform and options.
|
|
|
|
Indeed, the RRG/Iceman fork can be used on other Proxmark3 hardware platforms as well.
|
|
|
|
Via some definitions, you can adjust the firmware for a given platform, but also to add features like the support of the Blue Shark add-on or to select which standalone mode to embed.
|
|
|
|
## Client
|
|
|
|
The client doesn't depend on the capabilities of the Proxmark3 it's connected to.
|
|
So you can use the same client for different Proxmark3 platforms, given that everything is running the same version.
|
|
|
|
## Firmware
|
|
|
|
By default, the firmware is of course tuned for the Proxmark3 Rdv4.0 device, which has built-in support for 256kb onboard flash SPI memory, Sim module (smart card support), FPC connector.
|
|
These features make it very different from all other devices, there is non other like this one.
|
|
|
|
**Recommendation**: if you don't have a RDV4, we strongly recommend your device to have at least a 512kb arm chip, since this repo is on the very edge of 256kb limit.
|
|
|
|
A firmware built for the RDV4 can still run on the other platforms as it will auto-detect during boot that external SPI and Sim are not present, still it will boot faster if it's tuned to the platform.
|
|
|
|
If you need to tune things and save the configuration, create a file `Makefile.platform` in the root directory of the repository, see `Makefile.platform.sample`.
|
|
For an up-to-date exhaustive list of options, you can run `make PLATFORM=`.
|
|
|
|
## PLATFORM
|
|
|
|
Here are the supported values you can assign to `PLATFORM` in `Makefile.platform`:
|
|
|
|
| PLATFORM | DESCRIPTION |
|
|
|-----------------|----------------------------------------|
|
|
| PM3RDV4 (def) | Proxmark3 rdv4 with AT91SAM7S512 |
|
|
| PM3EVO | Proxmark3 EVO with AT91SAM7S512 |
|
|
| PM3V40 | Proxmark3 V4.0 with AT91SAM7S512 |
|
|
| PM3EASY | Proxmark3 rdv3 Easy with AT91SAM7S256 |
|
|
| PM3EASY512 | Proxmark3 rdv3 Easy with AT91SAM7S512 |
|
|
| PM3RDV2 | Proxmark3 rdv2 with AT91SAM7S512 |
|
|
| PM3OLD256 | Proxmark3 V1 with AT91SAM7S256 |
|
|
| PM3OLD512 | Proxmark3 V1 with AT91SAM7S512 |
|
|
|
|
By default `PLATFORM=PM3RDV4`.
|
|
|
|
Note that besides `PM3RDV4` and its unique features, all other platforms are equivalent and the MCU version (256 or 512) will be detected automatically during flashing.
|
|
|
|
Known issues:
|
|
|
|
* 256kb Arm chip devices: The compiled firmware image from this repo may/will be too large for your device.
|
|
* PM3 Evo: it has a different led/button pin assignment. It tends to be messed up.
|
|
|
|
## PLATFORM_EXTRAS
|
|
|
|
Here are the supported values you can assign to `PLATFORM_EXTRAS` in `Makefile.platform`:
|
|
|
|
| PLATFORM_EXTRAS | DESCRIPTION |
|
|
|-----------------|----------------------------------------|
|
|
| BTADDON | Proxmark3 rdv4 BT add-on |
|
|
|
|
By default `PLATFORM_EXTRAS=`.
|
|
|
|
If you have installed a Blue Shark add-on on your RDV4, define `PLATFORM_EXTRAS=BTADDON` in your `Makefile.platform`.
|
|
|
|
|
|
## STANDALONE
|
|
|
|
The RRG/Iceman fork gives you to easily choose which standalone mode to embed in the firmware.
|
|
|
|
Here are the supported values you can assign to `STANDALONE` in `Makefile.platform`:
|
|
|
|
| STANDALONE | DESCRIPTION |
|
|
|-----------------|----------------------------------------|
|
|
| | No standalone mode
|
|
| LF_SAMYRUN (def)| HID26 read/clone/sim - Samy Kamkar
|
|
| LF_ICERUN | standalone mode skeleton - iceman
|
|
| LF_PROXBRUTE | HID ProxII bruteforce - Brad Antoniewicz
|
|
| LF_HIDBRUTE | HID corporate 1000 bruteforce - Federico dotta & Maurizio Agazzini
|
|
| HF_YOUNG | Mifare sniff/simulation - Craig Young
|
|
| HF_MATTYRUN | Mifare sniff/clone - Matías A. Ré Medina
|
|
| HF_COLIN | Mifare ultra fast sniff/sim/clone - Colin Brigato
|
|
| HF_BOG | 14a sniff with ULC/ULEV1/NTAG auth storing in flashmem - Bogito
|
|
|
|
By default `STANDALONE=LF_SAMYRUN`.
|
|
|
|
## Next step
|
|
|
|
See [Compilation instructions](/doc/md/Use_of_Proxmark/0_Compilation-Instructions.md)
|