1. Validating Proxmark3 client functionality

1. Validating Proxmark3 client functionality
Table of Contents

If all went well you should get some information about the firmware and memory usage as well as the prompt, something like this.

[=] Session log /home/iceman/.proxmark3/logs/log_20220213.txt
[+] loaded from JSON file /home/iceman/.proxmark3/preferences.json
[=] Using UART port /dev/ttyS3
[=] Communicating with PM3 over USB-CDC


  8888888b.  888b     d888  .d8888b.
  888   Y88b 8888b   d8888 d88P  Y88b
  888    888 88888b.d88888      .d88P
  888   d88P 888Y88888P888     8888"
  8888888P"  888 Y888P 888      "Y8b.
  888        888  Y8P  888 888    888
  888        888   "   888 Y88b  d88P
  888        888       888  "Y8888P"    [ Iceman ❄️ ]



 [ Proxmark3 RFID instrument ]

 [ CLIENT ]
  RRG/Iceman/master/v4.14831-269 2022-02-13 05:03:08
  compiled with............. GCC 10.3.0
  platform.................. Linux / x86_64
  Readline support.......... present
  QT GUI support............ present
  native BT support......... absent
  Python script support..... present
  Lua SWIG support.......... present
  Python SWIG support....... present

 [ PROXMARK3 ]
  device.................... RDV4
  firmware.................. RDV4
  external flash............ present
  smartcard reader.......... present
  FPC USART for BT add-on... absent

 [ ARM ]
  bootrom: RRG/Iceman/master/v4.14831-269 2022-02-13 05:03:55
       os: RRG/Iceman/master/v4.14831-269 2022-02-13 05:03:49
  compiled with GCC 9.2.1 20191025 (release) [ARM/arm-9-branch revision 277599]

 [ FPGA ]
  LF image built for 2s30vq100 on 2020-07-08 at 23:08:07
  HF image built for 2s30vq100 on 2020-07-08 at 23:08:19
  HF FeliCa image built for 2s30vq100 on 2020-07-08 at 23:08:30

 [ Hardware ]
  --= uC: AT91SAM7S512 Rev A
  --= Embedded Processor: ARM7TDMI
  --= Internal SRAM size: 64K bytes
  --= Architecture identifier: AT91SAM7Sxx Series
  --= Embedded flash memory 512K bytes ( 59% used )

[usb] pm3 -->

This [usb] pm3 --> is the Proxmark3 interactive prompt.

To get interactive help

^Top

For basic help type help. Or for help on a set of sub commands type the command followed by help. For example hf mf help.

First tests

^Top

These commands will return some info about your Proxmark software and hardware status.

[usb] pm3 --> hw status
[usb] pm3 --> hw version
[usb] pm3 --> hw tune

You are now ready to use your newly flashed proxmark3 device. Many commands uses the h parameter to show a help text.

To quit the client

^Top

[usb] pm3 --> quit

or simple press CTRL-D on an empty line.

Next steps

^Top

Some configuration steps are still needed.

For the next steps, please read the following pages:

3.2 KiB Raw Blame History

1. Validating Proxmark3 client functionality

Table of Contents

To get interactive help

First tests

To quit the client

Next steps

3.2 KiB

Raw Blame History