proxmark3/doc/md/Use_of_Proxmark/2_Configuration-and-Verification.md

First things on your RDV40

You will need to run these commands to make sure your rdv4 is prepared

pm3 --> mem load f default_keys m
pm3 --> mem load f default_pwd t
pm3 --> mem load f default_iclass_keys i
pm3 --> lf t55xx deviceconfig a 29 b 17 c 15 d 47 e 15 p
pm3 --> lf t55xx deviceconfig r 1 a 31 b 20 c 18 d 50 e 15 p
pm3 --> lf t55xx deviceconfig r 2 a 31 b 20 c 18 d 40 e 15 p
pm3 --> lf t55xx deviceconfig r 3 a 29 b 17 c 15 d 31 e 15 f 47 g 63 p

Set all t55xx settings to defaults (will set all 4 at once)
pm3 --> lf t55xx deviceconfig z p

Verify sim module firmware version

To make sure you got the latest sim module firmware.

Lastest version is v3.11

pm3 --> hw status

Find version in the long output, look for these two lines

#db# Smart card module (ISO 7816)
#db#   version.................v2.06

This version is obsolete. The following command upgrades your device sim module firmware. Don't not turn off your device during the execution of this command!!

pm3 --> sc upgrade f ../tools/simmodule/SIM011.BIN 

You get the following output if the execution was successful:

[!] WARNING - Smartcard socket firmware upgrade.
[!] A dangerous command, do wrong and you will brick the smart card socket
[+] Smartcard socket firmware uploading to PM3
..
[+] Smartcard socket firmware updating,  don't turn off your PM3!
#db# FW 0000
#db# FW 0080
#db# FW 0100
#db# FW 0180
#db# FW 0200
#db# FW 0280
[+] Smartcard socket firmware upgraded successful        

Next steps

For the next steps, please read the following page:

• Commands & Features