proxmark3/Use_of_Proxmark/2_Configuration-and-Verification.md

First things on your RDV40

You will need to run these commands to make sure your rdv4 is prepared

pm3 --> mem load f default_keys m
pm3 --> mem load f default_pwd t
pm3 --> mem load f default_iclass_keys i
pm3 --> lf t55xx deviceconfig a 29 b 17 c 15 d 47 e 15 p

Verify sim module firmware version

To make sure you got the latest sim module firmware. Lastest version is v3.11

pm3 --> hw status

Find version in the long output, look for these two lines

#db# Smart card module (ISO 7816)
#db#   version.................v2.06

This version is obselete. The following command upgrades your device sim module firmware. Don't not turn of your device during the execution of this command.

pm3 --> sc upgrade f ../tools/simmodule/SIM011.BIN 

You get the following output, this is a successful execution.

[!] WARNING - Smartcard socket firmware upgrade.          
[!] A dangerous command, do wrong and you will brick the smart card socket          
[+] Smartcard socket firmware uploading to PM3          
..
[+] Smartcard socket firmware updating,  don't turn off your PM3!          
#db# FW 0000          
#db# FW 0080          
#db# FW 0100          
#db# FW 0180          
#db# FW 0200          
#db# FW 0280          
[+] Smartcard socket firmware upgraded successful