2.5 KiB
Parrot OS Installation
Notes
Some further notes can be found at @5w0rdfish repo Proxmark Installation for Parrot OS
Video Installation guide
Manual Install
First what we want to do is get an update for the system. If you need to upgrade do this before the install
Update
sudo apt-get update
Requirements.
sudo apt-get install p7zip git build-essential libreadline5 libreadline-dev \
libusb-0.1-4 libusb-dev libqt4-dev perl pkg-config wget libncurses5-dev gcc-arm-none-eabi
If you do get any issues during the requirements installation, I have found it to help using the synaptic package manager.
Clone Fork
git clone https://github.com/RfidResearchGroup/proxmark3.git
Change directory into the directory created
cd proxmark3
Get the latest commits
git pull
Make Udev
Iceman has made the udev script which takes care of the blacklist rules. This should take care of the remove modem manager. The make udev command also create's an alias for the pm3 under /dev which you will use to connect to the proxmark.
sudo make udev
Note
If you have any issues connecting or during the flash, follow the steps listed here and use the command sudo apt remove modemmanager
Log out and log back in again. And now we are all set to take the next step.
Clean and Compile
Clean and complete compilation within the proxmark3 folder
make clean && make all
Check Connection
Once this is complete run the following comands to make sure the proxmark is being picked up by your computer.
sudo dmesg | grep -i usb
It should show up as a CDC device:
[10416.555108] usb 2-1.2: Product: PM3
[10416.555111] usb 2-1.2: Manufacturer: proxmark.org
[10416.555871] cdc_acm 2-1.2:1.0: ttyACM0: USB ACM device
Flash the BOOTROM & FULLIMAGE
client/flasher /dev/ttyACM0 -b bootrom/obj/bootrom.elf armsrc/obj/fullimage.elf
Change into the client folder
cd client
Run the client
./proxmark3 /dev/pm #press tab on the keyboard for it to detect the proxmark
or
Run the client
./proxmark3 /dev/ttyACM0
Run a test command
hw tune