mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-11-14 05:41:43 +08:00
83 lines
2.6 KiB
Markdown
83 lines
2.6 KiB
Markdown
# Building on Windows
|
|
You will need to use the Gator96100 Proxspace package to assist in your windows installation.
|
|
This can be downloaded from https://github.com/Gator96100/ProxSpace/
|
|
|
|
## Notes
|
|
If you receive gcc errors using v3.1 during build, download and use v2.2. This may help resolve the issue.
|
|
|
|
- https://github.com/Gator96100/ProxSpace/releases/tag/v3.1 (release v3.1 with gcc v7.3.0 )
|
|
- https://github.com/Gator96100/ProxSpace/releases/tag/v2.2 (release v2.2 with gcc v5.3.0 arm-none-eabi-gcc v7.1.0)
|
|
|
|
---
|
|
# Video Installation guide
|
|
[](https://youtu.be/zzF0NCMJnYU "Windows Installation Tutorial")
|
|
|
|
## Manual Installation
|
|
|
|
### Driver Installation
|
|
|
|
Install required drivers for your windows installation. You will may need admin privileges to do this.
|
|
(This is covered in the video) Step by step guides are online such as [RiscCorps](https://store.ryscc.com/blogs/news/how-to-install-a-proxmark3-driver-on-windows-10)
|
|
|
|
### Install Github
|
|
|
|
Install Github for Windows https://desktop.github.com/
|
|
|
|
### Download / clone Proxspace repo
|
|
|
|
Download the required proxspace repo. https://github.com/Gator96100/ProxSpace/
|
|
|
|
Extract 'ProxSpace' to a location on drive without spaces.
|
|
For example D:\OneDrive\Documents\GitHub is ok whereas C:\My Documents\My Projects\proxspace is not.
|
|
|
|
### Clone RFID RESEARCH GROUP files
|
|
|
|
Clone fork
|
|
```sh
|
|
git clone https://github.com/RfidResearchGroup/proxmark3.git
|
|
```
|
|
### Copy files to Proxspace
|
|
|
|
Copy all the contents from the proxmark3 folder into the proxspace pm3 folder
|
|
|
|
### Run the .bat
|
|
|
|
Run runme.bat or runme64.bat depending on your Windows architecture.
|
|
|
|
Please note you will need to use / as you are using BASH.
|
|
|
|
### Make
|
|
|
|
CLEAN COMPILE inside the pm3 window.
|
|
```sh
|
|
make clean && make all
|
|
```
|
|
### Flash the image
|
|
|
|
Flash the BOOTROM & FULLIMAGE
|
|
```sh
|
|
client/flasher.exe comX -b bootrom/obj/bootrom.elf armsrc/obj/fullimage.elf
|
|
```
|
|
|
|
### Run the client
|
|
|
|
Assuming you have Proxmark3 Windows drivers installed you can run the Proxmark software where "X" is the com port number assigned to proxmark3 under Windows.
|
|
|
|
Change into the client folder
|
|
```sh
|
|
cd client
|
|
```
|
|
|
|
Run the client
|
|
```sh
|
|
./proxmark3.exe comX
|
|
```
|
|
|
|
### Test
|
|
|
|
Check your firmware revision on the Proxmark III with
|
|
```sh
|
|
hw ver
|
|
```
|
|
For basic help type help. Or for help on a set of sub commands type the command followed by help. For example hf mf help.
|
|
Make sure you head over to the use of [proxmark area](https://github.com/5w0rdfish/proxmark3/tree/master/Use_of_Proxmark) to help you get on your way!
|