mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2025-10-31 08:26:15 +08:00
98 lines
2.9 KiB
Markdown
98 lines
2.9 KiB
Markdown
### First things on your RDV40
|
|
|
|
You will need to run these commands to make sure your rdv4 is prepared
|
|
```
|
|
[usb] pm3 --> script run init_rdv4
|
|
```
|
|
|
|
|
|
The lua script actually executes the following commands below. These are here because of documentation, you can jump down to *Verify sim module firmware version* part.
|
|
```
|
|
[usb] pm3 --> mem load -f mfc_default_keys -m
|
|
[usb] pm3 --> mem load -f t55xx_default_pwds -t
|
|
[usb] pm3 --> mem load -f iclass_default_keys -i
|
|
[usb] pm3 --> lf t55xx deviceconfig --r0 -a 29 -b 17 -c 15 -d 47 -e 15 -p
|
|
[usb] pm3 --> lf t55xx deviceconfig --r1 -a 31 -b 20 -c 18 -d 50 -e 15 -p
|
|
[usb] pm3 --> lf t55xx deviceconfig --r2 -a 31 -b 20 -c 18 -d 40 -e 15 -p
|
|
[usb] pm3 --> lf t55xx deviceconfig --r3 -a 29 -b 17 -c 15 -d 31 -e 15 -f 47 -g 63 -p
|
|
|
|
Set all t55xx settings to defaults (will set all 4 at once)
|
|
[usb] pm3 --> lf t55xx deviceconfig -z -p
|
|
```
|
|
|
|
|
|
### Verify sim module firmware version
|
|
|
|
To make sure you got the latest sim module firmware.
|
|
|
|
_Latest version is v3.11_
|
|
|
|
```
|
|
[usb] pm3 --> hw status
|
|
```
|
|
|
|
Find version in the long output, look for these two lines
|
|
|
|
```
|
|
#db# Smart card module (ISO 7816)
|
|
#db# version.................v2.06
|
|
```
|
|
|
|
This version is obsolete.
|
|
|
|
If you didn't download sim011.bin from the RRG Repo be aware that it might be corrupted or faulty.
|
|
You find a hash text file in this folder. It was generated with the following linux command.
|
|
|
|
```
|
|
sha512sum -b sim011.bin > sim011.sha512.txt
|
|
```
|
|
|
|
You should validate the sim011.bin file against this hash file in order to be sure the file is not corrupted or faulty.
|
|
|
|
The following command upgrades your device sim module firmware.
|
|
Don't not turn off your device during the execution of this command!!
|
|
Even its a quite fast command you should be warned. You may brick it if you interrupt it.
|
|
|
|
```
|
|
[usb] pm3 --> smart upgrade -f /usr/local/share/proxmark3/firmware/sim011.bin
|
|
# or if from local repo
|
|
[usb] pm3 --> smart upgrade -f sim011.bin
|
|
```
|
|
|
|
You get the following output if the execution was successful:
|
|
|
|
```
|
|
[=] -------------------------------------------------------------------
|
|
[!] ⚠️ WARNING - sim module firmware upgrade
|
|
[!] ⚠️ A dangerous command, do wrong and you could brick the sim module
|
|
[=] -------------------------------------------------------------------
|
|
|
|
[=] firmware file sim011.bin
|
|
[=] Checking integrity sim011.sha512.txt
|
|
[+] loaded 733 bytes from binary file sim011.bin
|
|
[+] loaded 141 bytes from binary file sim011.sha512.txt
|
|
[=] Don't turn off your PM3!
|
|
[+] Sim module firmware uploading to PM3...
|
|
🕑 733 bytes sent
|
|
[+] Sim module firmware updating...
|
|
[#] FW 0000
|
|
[#] FW 0080
|
|
[#] FW 0100
|
|
[#] FW 0180
|
|
[#] FW 0200
|
|
[#] FW 0280
|
|
[+] Sim module firmware upgrade successful
|
|
```
|
|
|
|
Run hw status command to verify that the upgrade went well.
|
|
|
|
```
|
|
[usb] pm3 --> hw status
|
|
```
|
|
|
|
## Next steps
|
|
|
|
For the next steps, please read the following page:
|
|
|
|
* [Commands & Features](/doc/md/Use_of_Proxmark/3_Commands-and-Features.md)
|
|
|