mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-11-16 06:43:29 +08:00
148 lines
4.7 KiB
Markdown
148 lines
4.7 KiB
Markdown
# Notes about the tracelog
|
|
<a id="top"></a>
|
|
|
|
|
|
# Table of Contents
|
|
- [Notes about the tracelog](#notes-about-the-tracelog)
|
|
- [Table of Contents](#table-of-contents)
|
|
- [Trace command](#trace-command)
|
|
- [Timing](#timing)
|
|
- [Sources](#sources)
|
|
- [Data](#data)
|
|
- [CRC](#crc)
|
|
- [Annotation](#annotation)
|
|
- [Tracelog format](#tracelog-format)
|
|
- [Trace and Wireshark](#trace-and-wireshark)
|
|
|
|
|
|
## Trace command
|
|
^[Top](#top)
|
|
|
|
The `trace` command lists the data exchange by the proxmark3 and a tag or a reader in human readable form.
|
|
|
|
With `trace list` a table is shown which gives timing information, the src of the data bytes, the transmitted/received bytes itself, a check if the CRC was correct and some decoding of the command.
|
|
|
|
### Timing
|
|
^[Top](#top)
|
|
|
|
The Start and the End column lists timestamps when the transmission of the shown data started (time of first bit) and when it ended (end of last modulation).
|
|
|
|
The unit for this time information depends on the protocol in use:
|
|
|
|
* ISO14443A and Thinfilm: all times are in carrier periods (1/13.56MHz)
|
|
* For Legic timing information depends also on direction:
|
|
* Reader Mode: Timings are in ticks (1us == 1.5ticks)
|
|
* Tag Mode: Timings are in sub carrier periods (1/212 kHz == 4.7us)
|
|
* Hitag1 / Hitag2 / HitagS: Elementary Time Unit (ETU) is 8µs
|
|
* iCLASS, ISO15693, ISO18092 and FeliCa have no accurate timing information at the moment
|
|
* For others timing is not available
|
|
|
|
By specifying the option ```f``` (e.g. ```trace list -t 14a -f```) the frame delay times are shown. (So you don't have to do the math by your own).
|
|
|
|
### Sources
|
|
^[Top](#top)
|
|
|
|
If the data is marked as a response the source is shown as Tag. Otherwise it is marked as Reader (Rdr).
|
|
|
|
### Data
|
|
^[Top](#top)
|
|
|
|
This column shows the raw bytes transmitted over the air. With option ```c``` CRC bytes are marked in square brackets.
|
|
|
|
### CRC
|
|
^[Top](#top)
|
|
|
|
Marks if the transmitted CRC matches with the calculated CRC.
|
|
|
|
### Annotation
|
|
^[Top](#top)
|
|
|
|
Annotations provide a rough decoding of the transmitted data. For ISO14443A a more detailed decoding is available with Wireshark (s. next chapter)
|
|
|
|
## Tracelog format
|
|
^[Top](#top)
|
|
|
|
The binary format for the dynamic tracelog is as following.
|
|
|
|
```
|
|
/*
|
|
Traceformat:
|
|
32 bits timestamp (little endian)
|
|
16 bits duration (little endian)
|
|
15 bits data length (little endian) (0x7FFF)
|
|
1 bit isResponse (0=reader to tag, 1=tag to reader)
|
|
data length Bytes data
|
|
x Bytes parity, where x == ceil(data length/8)
|
|
*/
|
|
|
|
typedef struct {
|
|
uint32_t timestamp;
|
|
uint16_t duration;
|
|
uint16_t data_len : 15;
|
|
bool isResponse : 1;
|
|
uint8_t frame[];
|
|
// data_len bytes of data
|
|
// ceil(data_len/8) bytes of parity
|
|
} PACKED tracelog_hdr_t;
|
|
|
|
#define TRACELOG_HDR_LEN sizeof(tracelog_hdr_t)
|
|
#define TRACELOG_PARITY_LEN(x) (((x)->data_len - 1) / 8 + 1)
|
|
```
|
|
|
|
## Trace and Wireshark
|
|
^[Top](#top)
|
|
|
|
To get a more detailed explanation of the transmitted data for ISO14443A traces the output can be converted to a pcapng file to read it with [Wireshark](https://www.wireshark.org/).
|
|
|
|
To do so
|
|
|
|
* use `trace list -t 14a -x`
|
|
* copy the output (starting with the timestamp) into a textfile
|
|
* run `text2pcap -t "%S." -l 264 -n <input-text-file> <output-pcapng-file>`
|
|
* now open your pcapng file in Wireshark or read it with the CLI version `tshark`
|
|
|
|
An example frame
|
|
|
|
with `trace list -t 14a`:
|
|
|
|
```
|
|
19072 | 29536 | Rdr |93 70 88 04 cf ff bc 7f bb | ok | SELECT_UID
|
|
```
|
|
|
|
the same data with `tshark -r foo.pcapng -V -x`:
|
|
|
|
```
|
|
Frame 5: 13 bytes on wire (104 bits), 13 bytes captured (104 bits) on interface 0
|
|
Interface id: 0 (unknown)
|
|
Interface name: unknown
|
|
Encapsulation type: ISO 14443 contactless smartcard standards (177)
|
|
Arrival Time: Aug 17, 2019 23:17:00.000002606 CEST
|
|
[Time shift for this packet: 0.000000000 seconds]
|
|
Epoch Time: 1566076620.000002606 seconds
|
|
[Time delta from previous captured frame: 0.000000840 seconds]
|
|
[Time delta from previous displayed frame: 0.000000840 seconds]
|
|
[Time since reference or first frame: 0.000001907 seconds]
|
|
Frame Number: 5
|
|
Frame Length: 13 bytes (104 bits)
|
|
Capture Length: 13 bytes (104 bits)
|
|
[Frame is marked: False]
|
|
[Frame is ignored: False]
|
|
[Protocols in frame: iso14443]
|
|
ISO 14443
|
|
Pseudo header
|
|
Version: 0x00
|
|
Event: Data transfer PCD -> PICC (0xfe)
|
|
Length field: 9
|
|
Message: Select
|
|
SEL: 0x93
|
|
NVB: 0x70
|
|
CT: 0x88
|
|
UID_CLn: 04cfff
|
|
BCC: 0xbc
|
|
CRC: 0xbb7f [correct]
|
|
[CRC Status: Good]
|
|
|
|
0000 00 fe 00 09 93 70 88 04 cf ff bc 7f bb .....p.......
|
|
```
|
|
|
|
If the Wireshark ISO14443a dissector is missing some commands or needs some other rework please [file a bug](https://bugs.wireshark.org/bugzilla/).
|