1.8 KiB
Compilation instructions
Tuning compilation parameters
The client and the Proxmark3 firmware should always be in sync. Nevertheless, the firmware can be tuned depending on the Proxmark3 platform and options.
Indeed, the RRG/Iceman fork can be used on other Proxmark3 hardware platforms as well.
Via some definitions, you can adjust the firmware for a given platform, but also to add features like the support of the Blue Shark add-on or to select which standalone mode to embed.
To learn how to adjust the firmware, please read Advanced compilation parameters.
Get the latest commits
cd proxmark3
git pull
Clean and compile everything
make clean && make all
Flash the BOOTROM & FULLIMAGE
In most cases, you can run the script flash-all.sh which try to auto-detect the port to use, on several OS.
For the other cases, specify the port by yourself. For example, for a Proxmark3 connected via USB under Linux:
client/proxmark3-flasher /dev/ttyACM0 -b bootrom/obj/bootrom.elf armsrc/obj/fullimage.elf
Run the client
In most cases, you can run the script proxmark3.sh which try to auto-detect the port to use, on several OS.
For the other cases, specify the port by yourself. For example, for a Proxmark3 connected via USB under Linux:
Here, for example, for a Proxmark3 connected via USB under Linux:
cd client
./proxmark3 /dev/ttyACM0
Next steps
For the next steps, please read the following pages: