proxmark3/include/usb_cmd.h

79 lines
2.9 KiB
C

//-----------------------------------------------------------------------------
// Definitions for all the types of commands that may be sent over USB; our
// own protocol.
// Jonathan Westhues, Mar 2006
// Edits by Gerhard de Koning Gans, Sep 2007
//-----------------------------------------------------------------------------
#ifndef __USB_CMD_H
#define __USB_CMD_H
typedef struct {
DWORD cmd;
DWORD ext1;
DWORD ext2;
DWORD ext3;
union {
BYTE asBytes[48];
DWORD asDwords[12];
} d;
} UsbCommand;
// For the bootloader
#define CMD_DEVICE_INFO 0x0000
#define CMD_SETUP_WRITE 0x0001
#define CMD_FINISH_WRITE 0x0003
#define CMD_HARDWARE_RESET 0x0004
#define CMD_START_FLASH 0x0005
#define CMD_ACK 0x00ff
// For general mucking around
#define CMD_DEBUG_PRINT_STRING 0x0100
#define CMD_DEBUG_PRINT_INTEGERS 0x0101
#define CMD_DEBUG_PRINT_BYTES 0x0102
#define CMD_LCD_RESET 0x0103
#define CMD_LCD 0x0104
#define CMD_BUFF_CLEAR 0x0105
#define CMD_READ_MEM 0x0106
#define CMD_VERSION 0x0107
// For low-frequency tags
#define CMD_READ_TI_TYPE 0x0202
#define CMD_WRITE_TI_TYPE 0x0203
#define CMD_DOWNLOADED_RAW_BITS_TI_TYPE 0x0204
#define CMD_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0205
#define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0206
#define CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K 0x0207
#define CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K 0x0208
#define CMD_DOWNLOADED_SIM_SAMPLES_125K 0x0209
#define CMD_SIMULATE_TAG_125K 0x020A
#define CMD_HID_DEMOD_FSK 0x020B
#define CMD_HID_SIM_TAG 0x020C
#define CMD_SET_LF_DIVISOR 0x020D
#define CMD_LF_SIMULATE_BIDIR 0x020E
// For the 13.56 MHz tags
#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 0x0300
#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443 0x0301
#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443_SIM 0x0302
#define CMD_READ_SRI512_TAG 0x0303
#define CMD_READER_ISO_15693 0x0310
#define CMD_SIMTAG_ISO_15693 0x0311
#define CMD_SIMULATE_TAG_HF_LISTEN 0x0380
#define CMD_SIMULATE_TAG_ISO_14443 0x0381
#define CMD_SNOOP_ISO_14443 0x0382
#define CMD_SNOOP_ISO_14443a 0x0383
#define CMD_SIMULATE_TAG_ISO_14443a 0x0384
#define CMD_READER_ISO_14443a 0x0385
#define CMD_SIMULATE_MIFARE_CARD 0x0386
// For measurements of the antenna tuning
#define CMD_MEASURE_ANTENNA_TUNING 0x0400
#define CMD_MEASURED_ANTENNA_TUNING 0x0401
#define CMD_LISTEN_READER_FIELD 0x0402
// For direct FPGA control
#define CMD_FPGA_MAJOR_MODE_OFF 0x0500
#endif