1.8 KiB
Homebrew (Mac OS X)
These instructions comes from @Chrisfu, where we got the proxmark3.rb scriptfile from. For further questions about Mac & Homebrew, contact @Chrisfu (https://github.com/chrisfu/)
-
Install homebrew if you haven't yet already done so: http://brew.sh/
-
Tap this repo:
brew tap RfidResearchGroup/proxmark3
-
Install Proxmark3:
brew install proxmark3
for stable release orbrew install --HEAD proxmark3
for latest non-stable from GitHub.
Upgrading HomeBrew tap formula
This method is useful for those looking to run bleeding-edge versions of RRG/iceman's client. Keep this in mind when attempting to update your HomeBrew tap formula as this procedure could easily cause a build to break if an update is unstable on macOS.
Tested on macOS High Sierra 10.13.2
Note: This assumes you have already installed RRG/iceman's fork from HomeBrew as mentioned above
Force HomeBrew to pull the latest source from github
brew upgrade --fetch-HEAD RfidResearchGroup/proxmark3
Flash the BOOTROM & FULLIMAGE
With your Proxmark3 unplugged from your machine, press and hold the button on your Proxmark3 as you plug it into a USB port. Continue to hold the button until after this step is complete and the proxmark3-flasher
command outputs "Have a nice day!"*
$ sudo proxmark3-flasher /dev/tty.usbmodem881 -b /usr/local/Cellar/proxmark3/HEAD-6a710ef/share/firmware/bootrom.elf /usr/local/Cellar/proxmark3/HEAD-6a710ef/share/firmware/fullimage.elf
Run the client
sudo proxmark3 /dev/tty.usbmodem881
Next steps
For the next steps, please read the following pages: