mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-11-13 21:26:38 +08:00
90 lines
No EOL
2.4 KiB
Markdown
90 lines
No EOL
2.4 KiB
Markdown
<a id="Top"></a>
|
|
|
|
# Visual Studio Code Installation Instructions
|
|
|
|
# Table of Contents
|
|
- [Visual Studio Code Installation Instructions](#visual-studio-code-installation-instructions)
|
|
- [Table of Contents](#table-of-contents)
|
|
- [Visual Studio Code for debugging](#visual-studio-code-for-debugging)
|
|
- [Debian / Ubuntu / Kali / ParrotOS / Raspbian](#debian--ubuntu--kali--parrotos--raspbian)
|
|
- [Windows: WSL](#windows-wsl)
|
|
- [Windows: ProxSpace](#windows-proxspace)
|
|
|
|
|
|
|
|
# Visual Studio Code for debugging
|
|
^[Top](#top)
|
|
|
|
Download and install [Visual Studio Code](https://code.visualstudio.com/)
|
|
|
|
Download and install [J-Link Software and Documentation pack](https://www.segger.com/downloads/jlink)
|
|
|
|
|
|
## Debian / Ubuntu / Kali / ParrotOS / Raspbian
|
|
^[Top](#top)
|
|
|
|
Install dependencies
|
|
|
|
```sh
|
|
sudo apt-get install --no-install-recommends binutils-arm-none-eabi gdb openocd gdb-multiarch
|
|
```
|
|
|
|
On some systems `arm-none-eabi-gdb` was replaced with `gdb-multiarch`. In order to use the J-Link debugger you need to link `arm-none-eabi-gdb` to `gdb-multiarch`:
|
|
```sh
|
|
ln -s /usr/bin/gdb-multiarch /usr/bin/arm-none-eabi-gdb
|
|
```
|
|
|
|
Setup the Visual Studio Code configuration, by going into your project folder and run:
|
|
```sh
|
|
./.vscode/setup.sh
|
|
```
|
|
|
|
now launch Visual Studio Code and open your project folder
|
|
|
|
|
|
## Windows: WSL
|
|
^[Top](#top)
|
|
|
|
Enter WSL prompt (`wsl` or `start windows terminal`)
|
|
|
|
Install dependencies
|
|
```sh
|
|
sudo apt-get install --no-install-recommends binutils-arm-none-eabi gdb openocd gdb-multiarch
|
|
```
|
|
|
|
The J-Link debugger requires `arm-none-eabi-gdb` which was replaced with `gdb-multiarch`. In order to use the J-Link debugger link `arm-none-eabi-gdb` to `gdb-multiarch`:
|
|
```sh
|
|
sudo ln -s /usr/bin/gdb-multiarch /usr/bin/arm-none-eabi-gdb
|
|
```
|
|
|
|
Setup the Visual Studio Code configuration, by going into your project folder and run:
|
|
```sh
|
|
./.vscode/setup.sh
|
|
```
|
|
|
|
and launch Visual Studio Code
|
|
```sh
|
|
code .
|
|
```
|
|
|
|
|
|
## Windows: ProxSpace
|
|
^[Top](#top)
|
|
|
|
Download and install [Visual Studio Code](https://code.visualstudio.com/)
|
|
|
|
Download and install [J-Link Software and Documentation pack for Windows](https://www.segger.com/downloads/jlink/JLink_Windows.exe)
|
|
|
|
Enter PorxSpace (`runme64.bat`) and enter your project folder.
|
|
|
|
Setup the Visual Studio Code configuration, by running:
|
|
```sh
|
|
./.vscode/setup.sh
|
|
```
|
|
|
|
now launch Visual Studio Code and open your project folder
|
|
|
|
|
|
|
|
_note_
|
|
Please install the recommended Visual Studio Code extensions in order for debugging to work. |