49 KiB
		
	
	
	
	
	
	
	
			
		
		
	
	Proxmark3 command dump
Some commands are available only if a Proxmark3 is actually connected.
Check column "offline" for their availability.
| command | offline | description | 
|---|---|---|
| help                    | Y | This help. Use '<command> help' for details of a particular command. | 
| auto                    | N | Automated detection process for unknown tags | 
| msleep                  | Y | Add a pause in milliseconds | 
| rem                     | Y | Add a text line in log file | 
| quit                    | Y | `` | 
| exit                    | Y | Exit program | 
analyse
{ Analyse utils... }
| command | offline | description | 
|---|---|---|
| analyse help            | Y | This help | 
| analyse lcr             | Y | Generate final byte for XOR LRC | 
| analyse crc             | Y | Stub method for CRC evaluations | 
| analyse chksum          | Y | Checksum with adding, masking and one's complement | 
| analyse dates           | Y | Look for datestamps in a given array of bytes | 
| analyse tea             | Y | Crypto TEA test | 
| analyse lfsr            | Y | LFSR tests | 
| analyse a               | Y | num bits test | 
| analyse nuid            | Y | create NUID from 7byte UID | 
| analyse demodbuff       | Y | Load binary string to demodbuffer | 
data
{ Plot window / data buffer manipulation... }
| command | offline | description | 
|---|---|---|
| data help               | Y | This help | 
| data askedgedetect      | Y | [threshold] Adjust Graph for manual ASK demod using the length of sample differences to detect the edge of a wave (use 20-45, def:25) | 
| data autocorr           | Y | [window length] [g] -- Autocorrelation over window - g to save back to GraphBuffer (overwrite) | 
| data biphaserawdecode   | Y | `[offset] [invert<0 | 
| data bin2hex            | Y | <digits> -- Converts binary to hexadecimal | 
| data bitsamples         | N | Get raw samples as bitstring | 
| data buffclear          | Y | Clears bigbuff on deviceside and graph window | 
| data convertbitstream   | Y | Convert GraphBuffer's 0/1 values to 127 / -127 | 
| data dec                | Y | Decimate samples | 
| data detectclock        | Y | `[<a | 
| data fsktonrz           | Y | Convert fsk2 to nrz wave for alternate fsk demodulating (for weak fsk) | 
| data getbitstream       | Y | Convert GraphBuffer's >=1 values to 1 and <1 to 0 | 
| data grid               | Y | <x> <y> -- overlay grid on graph window, use zero value to turn off either | 
| data hexsamples         | N | <bytes> [<offset>] -- Dump big buffer as hex bytes | 
| data hex2bin            | Y | <hexadecimal> -- Converts hexadecimal to binary | 
| data hide               | Y | Hide graph window | 
| data hpf                | Y | Remove DC offset from trace | 
| data load               | Y | <filename> -- Load trace (to graph window | 
| data ltrim              | Y | <samples> -- Trim samples from left of trace | 
| data rtrim              | Y | <location to end trace> -- Trim samples from right of trace | 
| data mtrim              | Y | <start> <stop> -- Trim out samples from the specified start to the specified stop | 
| data manrawdecode       | Y | [invert] [maxErr] -- Manchester decode binary stream in DemodBuffer | 
| data norm               | Y | Normalize max/min to +/-128 | 
| data plot               | Y | Show graph window (hit 'h' in window for keystroke help) | 
| data printdemodbuffer   | Y | [x] [o] <offset> [l] <length> -- print the data in the DemodBuffer - 'x' for hex output | 
| data rawdemod           | Y | [modulation] ... <options> -see help (h option) -- Demodulate the data in the GraphBuffer and output binary | 
| data samples            | N | [512 - 40000] -- Get raw samples for graph window (GraphBuffer) | 
| data save               | Y | Save trace (from graph window) | 
| data setgraphmarkers    | Y | [orange_marker] [blue_marker] (in graph window) | 
| data scale              | Y | <int> -- Set cursor display scale in carrier frequency expressed in kHz | 
| data setdebugmode       | Y | `<0 | 
| data shiftgraphzero     | Y | <shift> -- Shift 0 for Graphed wave + or - shift value | 
| data dirthreshold       | Y | <thres up> <thres down> -- Max rising higher up-thres/ Min falling lower down-thres, keep rest as prev. | 
| data tune               | N | Get hw tune samples for graph window | 
| data undec              | Y | Un-decimate samples by 2 | 
| data zerocrossings      | Y | Count time between zero-crossings | 
| data iir                | Y | apply IIR buttersworth filter on plotdata | 
emv
{ EMV ISO-14443 / ISO-7816... }
| command | offline | description | 
|---|---|---|
| emv help                | Y | This help | 
| emv exec                | N | Executes EMV contactless transaction. | 
| emv pse                 | N | Execute PPSE. It selects 2PAY.SYS.DDF01 or 1PAY.SYS.DDF01 directory. | 
| emv search              | N | Try to select all applets from applets list and print installed applets. | 
| emv select              | N | Select applet. | 
| emv gpo                 | N | Execute GetProcessingOptions. | 
| emv readrec             | N | Read files from card. | 
| emv genac               | N | Generate ApplicationCryptogram. | 
| emv challenge           | N | Generate challenge. | 
| emv intauth             | N | Internal authentication. | 
| emv scan                | N | Scan EMV card and save it contents to json file for emulator. | 
| emv test                | Y | Crypto logic test. | 
| emv list                | Y | List ISO7816 history | 
| emv roca                | N | Extract public keys and run ROCA test | 
hf
{ High frequency commands... }
| command | offline | description | 
|---|---|---|
| hf help                 | Y | This help | 
| hf list                 | Y | List protocol data in trace buffer | 
| hf tune                 | N | Continuously measure HF antenna tuning | 
| hf search               | Y | Search for known HF tags | 
| hf sniff                | N | <samples to skip (10000)> <triggers to skip (1)> Generic HF Sniff | 
hf 14a
{ ISO14443A RFIDs... }
| command | offline | description | 
|---|---|---|
| hf 14a help             | Y | This help | 
| hf 14a list             | Y | List ISO 14443-a history | 
| hf 14a info             | N | Tag information | 
| hf 14a reader           | N | Act like an ISO14443-a reader | 
| hf 14a cuids            | N | <n> Collect n>0 ISO14443-a UIDs in one go | 
| hf 14a sim              | N | <UID> -- Simulate ISO 14443-a tag | 
| hf 14a sniff            | N | sniff ISO 14443-a traffic | 
| hf 14a apdu             | N | Send ISO 14443-4 APDU to tag | 
| hf 14a chaining         | N | Control ISO 14443-4 input chaining | 
| hf 14a raw              | N | Send raw hex data to tag | 
| hf 14a antifuzz         | N | Fuzzing the anticollision phase.  Warning! Readers may react strange | 
hf 14b
{ ISO14443B RFIDs... }
| command | offline | description | 
|---|---|---|
| hf 14b help             | Y | This help | 
| hf 14b dump             | N | Read all memory pages of an ISO14443-B tag, save to file | 
| hf 14b info             | N | Tag information | 
| hf 14b list             | Y | List ISO 14443B history | 
| hf 14b raw              | N | Send raw hex data to tag | 
| hf 14b reader           | N | Act as a 14443B reader to identify a tag | 
| hf 14b sim              | N | Fake ISO 14443B tag | 
| hf 14b sniff            | N | Eavesdrop ISO 14443B | 
| hf 14b sriread          | N | `Read contents of a SRI512 | 
| hf 14b sriwrite         | N | `Write data to a SRI512 | 
hf 15
{ ISO15693 RFIDs... }
| command | offline | description | 
|---|---|---|
| hf 15 help              | Y | This help | 
| hf 15 demod             | Y | Demodulate ISO15693 from tag | 
| hf 15 dump              | N | Read all memory pages of an ISO15693 tag, save to file | 
| hf 15 findafi           | N | Brute force AFI of an ISO15693 tag | 
| hf 15 writeafi          | N | Writes the AFI on an ISO15693 tag | 
| hf 15 writedsfid        | N | Writes the DSFID on an ISO15693 tag | 
| hf 15 info              | N | Tag information | 
| hf 15 list              | Y | List ISO15693 history | 
| hf 15 raw               | N | Send raw hex data to tag | 
| hf 15 reader            | N | Act like an ISO15693 reader | 
| hf 15 record            | N | Record Samples (ISO15693) | 
| hf 15 restore           | N | Restore from file to all memory pages of an ISO15693 tag | 
| hf 15 sim               | N | Fake an ISO15693 tag | 
| hf 15 samples           | N | Acquire Samples as Reader (enables carrier, sends inquiry) | 
| hf 15 read              | N | Read a block | 
| hf 15 write             | N | Write a block | 
| hf 15 readmulti         | N | Reads multiple Blocks | 
| hf 15 csetuid           | N | Set UID for magic Chinese card | 
hf epa
{ German Identification Card... }
| command | offline | description | 
|---|---|---|
| hf epa help             | Y | This help | 
| hf epa cnonces          | N | <m> <n> <d> Acquire n>0 encrypted PACE nonces of size m>0 with d sec pauses | 
| hf epa preplay          | N | <mse> <get> <map> <pka> <ma> Perform PACE protocol by replaying given APDUs | 
hf felica
{ ISO18092 / Felica RFIDs... }
| command | offline | description | 
|---|---|---|
| hf felica help          | Y | This help | 
| hf felica list          | Y | List ISO 18092/FeliCa history | 
| hf felica reader        | N | Act like an ISO18092/FeliCa reader | 
| hf felica sniff         | N | Sniff ISO 18092/FeliCa traffic | 
| hf felica raw           | N | Send raw hex data to tag | 
| hf felica rqservice     | N | verify the existence of Area and Service, and to acquire Key Version. | 
| hf felica rqresponse    | N | verify the existence of a card and its Mode. | 
| hf felica rdunencrypted | N | read Block Data from authentication-not-required Service. | 
| hf felica wrunencrypted | N | write Block Data to an authentication-not-required Service. | 
| hf felica scsvcode      | N | acquire Area Code and Service Code. | 
| hf felica rqsyscode     | N | acquire System Code registered to the card. | 
| hf felica auth1         | N | authenticate a card. Start mutual authentication with Auth1 | 
| hf felica auth2         | N | allow a card to authenticate a Reader/Writer. Complete mutual authentication | 
| hf felica read          | N | read Block Data from authentication-required Service. | 
| hf felica rqspecver     | N | acquire the version of card OS. | 
| hf felica resetmode     | N | reset Mode to Mode 0. | 
| hf felica litesim       | N | <NDEF2> - only reply to poll request | 
| hf felica litedump      | N | Wait for and try dumping FelicaLite | 
hf legic
{ LEGIC RFIDs... }
| command | offline | description | 
|---|---|---|
| hf legic help           | Y | This help | 
| hf legic reader         | N | LEGIC Prime Reader UID and tag info | 
| hf legic info           | N | Display deobfuscated and decoded LEGIC Prime tag data | 
| hf legic dump           | N | Dump LEGIC Prime tag to binary file | 
| hf legic restore        | N | Restore a dump file onto a LEGIC Prime tag | 
| hf legic rdmem          | N | Read bytes from a LEGIC Prime tag | 
| hf legic sim            | N | Start tag simulator | 
| hf legic write          | N | Write data to a LEGIC Prime tag | 
| hf legic crc            | Y | Calculate Legic CRC over given bytes | 
| hf legic eload          | N | Load binary dump to emulator memory | 
| hf legic esave          | N | Save emulator memory to binary file | 
| hf legic list           | Y | List LEGIC history | 
| hf legic wipe           | N | Wipe a LEGIC Prime tag | 
hf iclass
{ ICLASS RFIDs... }
| command | offline | description | 
|---|---|---|
| hf iclass help          | Y | This help | 
| hf iclass calcnewkey    | Y | [options..] Calc diversified keys (blocks 3 & 4) to write new keys | 
| hf iclass chk           | Y | [options..] Check keys | 
| hf iclass clone         | N | [options..] Restore a dump file onto a iClass tag | 
| hf iclass decrypt       | Y | [options..] Decrypt given block data or tag dump file | 
| hf iclass dump          | N | [options..] Dump iClass tag to file | 
| hf iclass eload         | N | [f <fname>] Load iClass dump file into emulator memory | 
| hf iclass encrypt       | Y | [options..] Encrypt given block data | 
| hf iclass info          | Y |             Tag information | 
| hf iclass list          | Y |             List iClass history | 
| hf iclass loclass       | Y | [options..] Use loclass to perform bruteforce reader attack | 
| hf iclass lookup        | Y | [options..] Uses authentication trace to check for key in dictionary file | 
| hf iclass managekeys    | Y | [options..] Manage keys to use with iClass | 
| hf iclass permutekey    | N |             Permute function from 'heart of darkness' paper | 
| hf iclass rdbl          | N | [options..] Read iClass block | 
| hf iclass reader        | N |             Act like an iClass reader | 
| hf iclass readtagfile   | Y | [options..] Display content from tag dump file | 
| hf iclass replay        | N | <mac>       Read iClass tag via replay attack | 
| hf iclass sim           | N | [options..] Simulate iClass tag | 
| hf iclass sniff         | N |             Eavesdrop iClass communication | 
| hf iclass wrbl          | N | [options..] Write iClass block | 
hf mf
{ MIFARE RFIDs... }
| command | offline | description | 
|---|---|---|
| hf mf help              | Y | This help | 
| hf mf list              | Y | List MIFARE history | 
| hf mf darkside          | N | Darkside attack | 
| hf mf nested            | N | Nested attack | 
| hf mf hardnested        | Y | Nested attack for hardened MIFARE Classic cards | 
| hf mf autopwn           | N | Automatic key recovery tool for MIFARE Classic | 
| hf mf nack              | N | Test for MIFARE NACK bug | 
| hf mf chk               | N | Check keys | 
| hf mf fchk              | N | Check keys fast, targets all keys on card | 
| hf mf decrypt           | Y | [nt] [ar_enc] [at_enc] [data] - to decrypt sniff or trace | 
| hf mf rdbl              | N | Read MIFARE classic block | 
| hf mf rdsc              | N | Read MIFARE classic sector | 
| hf mf dump              | N | Dump MIFARE classic tag to binary file | 
| hf mf restore           | N | Restore MIFARE classic binary file to BLANK tag | 
| hf mf wrbl              | N | Write MIFARE classic block | 
| hf mf setmod            | N | Set MIFARE Classic EV1 load modulation strength | 
| hf mf auth4             | N | ISO14443-4 AES authentication | 
| hf mf sim               | N | Simulate MIFARE card | 
| hf mf eclr              | N | Clear simulator memory | 
| hf mf eget              | N | Get simulator memory block | 
| hf mf eset              | N | Set simulator memory block | 
| hf mf eload             | N | Load from file emul dump | 
| hf mf esave             | N | Save to file emul dump | 
| hf mf ecfill            | N | Fill simulator memory with help of keys from simulator | 
| hf mf ekeyprn           | N | Print keys from simulator memory | 
| hf mf csetuid           | N | Set UID     (magic chinese card) | 
| hf mf cwipe             | N | Wipe card to default UID/Sectors/Keys | 
| hf mf csetblk           | N | Write block (magic chinese card) | 
| hf mf cgetblk           | N | Read block  (magic chinese card) | 
| hf mf cgetsc            | N | Read sector (magic chinese card) | 
| hf mf cload             | N | Load dump   (magic chinese card) | 
| hf mf csave             | N | Save dump from magic chinese card into file or emulator | 
| hf mf mad               | N | Checks and prints MAD | 
| hf mf ndef              | N | Prints NDEF records from card | 
| hf mf ice               | N | collect MIFARE Classic nonces to file | 
hf mfp
{ MIFARE Plus RFIDs... }
| command | offline | description | 
|---|---|---|
| hf mfp help             | Y | This help | 
| hf mfp info             | N | Info about Mifare Plus tag | 
| hf mfp wrp              | N | Write Perso command | 
| hf mfp initp            | N | Fills all the card's keys | 
| hf mfp commitp          | N | Move card to SL1 or SL3 mode | 
| hf mfp auth             | N | Authentication | 
| hf mfp rdbl             | N | Read blocks | 
| hf mfp rdsc             | N | Read sectors | 
| hf mfp wrbl             | N | Write blocks | 
| hf mfp chk              | N | Check keys | 
| hf mfp mad              | N | Checks and prints MAD | 
| hf mfp ndef             | N | Prints NDEF records from card | 
hf mfu
{ MIFARE Ultralight RFIDs... }
| command | offline | description | 
|---|---|---|
| hf mfu help             | Y | This help | 
| hf mfu info             | N | Tag information | 
| hf mfu dump             | N | Dump Ultralight / Ultralight-C / NTAG tag to binary file | 
| hf mfu restore          | N | Restore a dump onto a MFU MAGIC tag | 
| hf mfu eload            | N | load Ultralight .eml dump file into emulator memory | 
| hf mfu rdbl             | N | Read block | 
| hf mfu wrbl             | N | Write block | 
| hf mfu cauth            | N | Authentication    - Ultralight C | 
| hf mfu setpwd           | N | Set 3des password - Ultralight-C | 
| hf mfu setuid           | N | Set UID - MAGIC tags only | 
| hf mfu sim              | N | Simulate Ultralight from emulator memory | 
| hf mfu gen              | Y | Generate 3des mifare diversified keys | 
| hf mfu pwdgen           | Y | Generate pwd from known algos | 
| hf mfu otptear          | N | Tear-off test on OTP bits | 
hf mfdes
{ MIFARE Desfire RFIDs... }
| command | offline | description | 
|---|---|---|
| hf mfdes help           | Y | This help | 
| hf mfdes info           | N | Tag information | 
| hf mfdes enum           | N | Tries enumerate all applications | 
| hf mfdes auth           | N | Tries a MIFARE DesFire Authentication | 
hf topaz
{ TOPAZ (NFC Type 1) RFIDs... }
| command | offline | description | 
|---|---|---|
| hf topaz help           | Y | This help | 
| hf topaz reader         | N | Act like a Topaz reader | 
| hf topaz sim            | N | <UID> -- Simulate Topaz tag | 
| hf topaz sniff          | N | Sniff Topaz reader-tag communication | 
| hf topaz raw            | N | Send raw hex data to tag | 
| hf topaz list           | Y | List Topaz history | 
hf fido
{ FIDO and FIDO2 authenticators... }
| command | offline | description | 
|---|---|---|
| hf fido help            | Y | This help. | 
| hf fido info            | N | Info about FIDO tag. | 
| hf fido reg             | N | FIDO U2F Registration Message. | 
| hf fido auth            | N | FIDO U2F Authentication Message. | 
| hf fido make            | N | FIDO2 MakeCredential command. | 
| hf fido assert          | N | FIDO2 GetAssertion command. | 
hf thinfilm
{ Thinfilm RFIDs... }
| command | offline | description | 
|---|---|---|
| hf thinfilm help        | Y | This help | 
| hf thinfilm info        | N | Tag information | 
| hf thinfilm list        | Y | List NFC Barcode / Thinfilm history - not correct | 
| hf thinfilm sim         | N | Fake Thinfilm tag | 
hw
{ Hardware commands... }
| command | offline | description | 
|---|---|---|
| hw help                 | Y | This help | 
| hw connect              | Y | connect Proxmark3 to serial port | 
| hw dbg                  | N | Set Proxmark3 debug level | 
| hw detectreader         | N | `['l' | 
| hw fpgaoff              | N | Set FPGA off | 
| hw lcd                  | N | <HEX command> <count> -- Send command/data to LCD | 
| hw lcdreset             | N | Hardware reset LCD | 
| hw ping                 | N | Test if the Proxmark3 is responsive | 
| hw readmem              | N | [address] -- Read memory at decimal address from flash | 
| hw reset                | N | Reset the Proxmark3 | 
| hw setlfdivisor         | N | <19 - 255> -- Drive LF antenna at 12MHz/(divisor+1) | 
| hw setmux               | N | Set the ADC mux to a specific value | 
| hw standalone           | N | Jump to the standalone mode | 
| hw status               | N | Show runtime status information about the connected Proxmark3 | 
| hw tia                  | N | Trigger a Timing Interval Acquisition to re-adjust the RealTimeCounter divider | 
| hw tune                 | N | Measure antenna tuning | 
| hw version              | N | Show version information about the connected Proxmark3 | 
lf
{ Low frequency commands... }
| command | offline | description | 
|---|---|---|
| lf help                 | Y | This help | 
| lf config               | N | Get/Set config for LF sampling, bit/sample, decimation, frequency | 
| lf cmdread              | N | Modulate LF reader field to send command before read (all periods in microseconds) | 
| lf read                 | N | Read LF tag | 
| lf search               | Y | Read and Search for valid known tag (in offline mode it you can load first then search) | 
| lf sim                  | N | Simulate LF tag from buffer with optional GAP (in microseconds) | 
| lf simask               | N | Simulate LF ASK tag from demodbuffer or input | 
| lf simfsk               | N | Simulate LF FSK tag from demodbuffer or input | 
| lf simpsk               | N | Simulate LF PSK tag from demodbuffer or input | 
| lf simbidir             | N | Simulate LF tag (with bidirectional data transmission between reader and tag) | 
| lf sniff                | N | Sniff LF traffic between reader and tag | 
| lf tune                 | N | Continuously measure LF antenna tuning | 
lf awid
{ AWID RFIDs... }
| command | offline | description | 
|---|---|---|
| lf awid help            | Y | this help | 
| lf awid demod           | Y | demodulate an AWID FSK tag from the GraphBuffer | 
| lf awid read            | N | attempt to read and extract tag data | 
| lf awid clone           | N | clone AWID tag to T55x7 (or to q5/T5555) | 
| lf awid sim             | N | simulate AWID tag | 
| lf awid brute           | N | Bruteforce card number against reader | 
| lf awid watch           | N | continuously watch for cards.  Reader mode | 
lf cotag
{ COTAG CHIPs... }
| command | offline | description | 
|---|---|---|
| lf cotag help           | Y | This help | 
| lf cotag demod          | Y | Tries to decode a COTAG signal | 
| lf cotag read           | N | Attempt to read and extract tag data | 
lf em
{ EM4X CHIPs & RFIDs... }
| command | offline | description | 
|---|---|---|
| lf em help              | Y | This help | 
| lf em 410x_demod        | Y | demodulate a EM410x tag from the GraphBuffer | 
| lf em 410x_read         | N | attempt to read and extract tag data | 
| lf em 410x_sim          | N | simulate EM410x tag | 
| lf em 410x_brute        | N | reader bruteforce attack by simulating EM410x tags | 
| lf em 410x_watch        | N | watches for EM410x 125/134 kHz tags (option 'h' for 134) | 
| lf em 410x_spoof        | N | watches for EM410x 125/134 kHz tags, and replays them. (option 'h' for 134) | 
| lf em 410x_write        | N | write EM410x UID to T5555(Q5) or T55x7 tag | 
| lf em 4x05_demod        | Y | demodulate a EM4x05/EM4x69 tag from the GraphBuffer | 
| lf em 4x05_dump         | N | dump EM4x05/EM4x69 tag | 
| lf em 4x05_wipe         | N | wipe EM4x05/EM4x69 tag | 
| lf em 4x05_info         | N | tag information EM4x05/EM4x69 | 
| lf em 4x05_read         | N | read word data from EM4x05/EM4x69 | 
| lf em 4x05_write        | N | write word data to EM4x05/EM4x69 | 
| lf em 4x50_demod        | Y | demodulate a EM4x50 tag from the GraphBuffer | 
| lf em 4x50_dump         | N | dump EM4x50 tag | 
| lf em 4x50_read         | N | read word data from EM4x50 | 
| lf em 4x50_write        | N | write word data to EM4x50 | 
lf fdx
{ FDX-B RFIDs... }
| command | offline | description | 
|---|---|---|
| lf fdx help             | Y | this help | 
| lf fdx demod            | Y | demodulate a FDX-B ISO11784/85 tag from the GraphBuffer | 
| lf fdx read             | N | attempt to read and extract tag data | 
| lf fdx clone            | N | clone animal ID tag to T55x7 (or to q5/T5555) | 
| lf fdx sim              | N | simulate Animal ID tag | 
lf gallagher
{ GALLAGHER RFIDs... }
| command | offline | description | 
|---|---|---|
| lf gallagher help       | Y | This help | 
| lf gallagher demod      | Y | Demodulate an GALLAGHER tag from the GraphBuffer | 
| lf gallagher read       | N | Attempt to read and extract tag data from the antenna | 
| lf gallagher clone      | N | clone GALLAGHER tag to T55x7 | 
| lf gallagher sim        | N | simulate GALLAGHER tag | 
lf gproxii
{ Guardall Prox II RFIDs... }
| command | offline | description | 
|---|---|---|
| lf gproxii help         | Y | this help | 
| lf gproxii demod        | Y | demodulate a G Prox II tag from the GraphBuffer | 
| lf gproxii read         | N | attempt to read and extract tag data from the antenna | 
| lf gproxii clone        | N | clone Guardall tag to T55x7 | 
| lf gproxii sim          | N | simulate Guardall tag | 
lf hid
{ HID RFIDs... }
| command | offline | description | 
|---|---|---|
| lf hid help             | Y | this help | 
| lf hid demod            | Y | demodulate HID Prox tag from the GraphBuffer | 
| lf hid read             | N | attempt to read and extract tag data | 
| lf hid clone            | N | clone HID tag to T55x7 | 
| lf hid sim              | N | simulate HID tag | 
| lf hid brute            | N | bruteforce card number against reader | 
| lf hid watch            | N | continuously watch for cards.  Reader mode | 
lf hitag
{ Hitag CHIPs... }
| command | offline | description | 
|---|---|---|
| lf hitag help           | Y | This help | 
| lf hitag list           | N | List Hitag trace history | 
| lf hitag info           | N | Tag information | 
| lf hitag reader         | N | Act like a Hitag Reader | 
| lf hitag sim            | N | Simulate Hitag transponder | 
| lf hitag sniff          | N | Eavesdrop Hitag communication | 
| lf hitag writer         | N | Act like a Hitag Writer | 
| lf hitag cc             | N | Test all challenges | 
lf indala
{ Indala RFIDs... }
| command | offline | description | 
|---|---|---|
| lf indala help          | Y | this help | 
| lf indala demod         | Y | demodulate an indala tag (PSK1) from GraphBuffer | 
| lf indala altdemod      | Y | alternative method to Demodulate samples for Indala 64 bit UID (option '224' for 224 bit) | 
| lf indala read          | N | read an Indala Prox tag from the antenna | 
| lf indala clone         | N | clone Indala tag to T55x7 | 
| lf indala sim           | N | simulate Indala tag | 
lf io
{ ioProx RFIDs... }
| command | offline | description | 
|---|---|---|
| lf io help              | Y | this help | 
| lf io demod             | Y | demodulate an IOProx tag from the GraphBuffer | 
| lf io read              | N | attempt to read and extract tag data | 
| lf io clone             | N | clone IOProx tag to T55x7 (or to q5/T5555) | 
| lf io sim               | N | simulate IOProx tag | 
| lf io watch             | N | continuously watch for cards. Reader mode | 
lf jablotron
{ Jablotron RFIDs... }
| command | offline | description | 
|---|---|---|
| lf jablotron help       | Y | This help | 
| lf jablotron demod      | Y | Demodulate an Jablotron tag from the GraphBuffer | 
| lf jablotron read       | N | Attempt to read and extract tag data from the antenna | 
| lf jablotron clone      | N | clone jablotron tag to T55x7 (or to q5/T5555) | 
| lf jablotron sim        | N | simulate jablotron tag | 
lf keri
{ KERI RFIDs... }
| command | offline | description | 
|---|---|---|
| lf keri help            | Y | This help | 
| lf keri demod           | Y | Demodulate an KERI tag from the GraphBuffer | 
| lf keri read            | N | Attempt to read and extract tag data from the antenna | 
| lf keri clone           | N | clone KERI tag to T55x7 (or to q5/T5555) | 
| lf keri sim             | N | simulate KERI tag | 
lf nedap
{ Nedap RFIDs... }
| command | offline | description | 
|---|---|---|
| lf nedap help           | Y | This help | 
| lf nedap demod          | Y | Demodulate Nedap tag from the GraphBuffer | 
| lf nedap generate       | Y | Generate Nedap bitstream in DemodBuffer | 
| lf nedap read           | N | Attempt to read and extract tag data from the antenna | 
| lf nedap clone          | N | Clone Nedap tag to T55x7 | 
| lf nedap sim            | N | Simulate Nedap tag | 
lf nexwatch
{ NexWatch RFIDs... }
| command | offline | description | 
|---|---|---|
| lf nexwatch help        | Y | This help | 
| lf nexwatch demod       | Y | Demodulate a NexWatch tag (nexkey, quadrakey) from the GraphBuffer | 
| lf nexwatch read        | N | Attempt to Read and Extract tag data from the antenna | 
| lf nexwatch clone       | N | clone NexWatch tag to T55x7 | 
| lf nexwatch sim         | N | simulate NexWatch tag | 
lf noralsy
{ Noralsy RFIDs... }
| command | offline | description | 
|---|---|---|
| lf noralsy help         | Y | This help | 
| lf noralsy demod        | Y | Demodulate an Noralsy tag from the GraphBuffer | 
| lf noralsy read         | N | Attempt to read and extract tag data from the antenna | 
| lf noralsy clone        | N | clone Noralsy tag to T55x7 (or to q5/T5555) | 
| lf noralsy sim          | N | simulate Noralsy tag | 
lf motorola
{ Motorola RFIDs... }
| command | offline | description | 
|---|---|---|
| lf motorola help        | Y | This help | 
| lf motorola demod       | Y | Demodulate an MOTOROLA tag from the GraphBuffer | 
| lf motorola read        | N | Attempt to read and extract tag data from the antenna | 
| lf motorola clone       | N | clone MOTOROLA tag to T55x7 | 
| lf motorola sim         | N | simulate MOTOROLA tag | 
lf pac
{ PAC/Stanley RFIDs... }
| command | offline | description | 
|---|---|---|
| lf pac help             | Y | This help | 
| lf pac demod            | Y | Demodulate a PAC tag from the GraphBuffer | 
| lf pac read             | N | Attempt to read and extract tag data from the antenna | 
| lf pac clone            | N | clone PAC tag to T55x7 | 
| lf pac sim              | N | simulate PAC tag | 
lf paradox
{ Paradox RFIDs... }
| command | offline | description | 
|---|---|---|
| lf paradox help         | Y | This help | 
| lf paradox demod        | Y | Demodulate a Paradox FSK tag from the GraphBuffer | 
| lf paradox read         | N | Attempt to read and Extract tag data from the antenna | 
| lf paradox clone        | N | clone paradox tag to T55x7 | 
| lf paradox sim          | N | simulate paradox tag | 
lf pcf7931
{ PCF7931 CHIPs... }
| command | offline | description | 
|---|---|---|
| lf pcf7931 help         | Y | This help | 
| lf pcf7931 read         | N | Read content of a PCF7931 transponder | 
| lf pcf7931 write        | N | Write data on a PCF7931 transponder. | 
| lf pcf7931 config       | Y | Configure the password, the tags initialization delay and time offsets (optional) | 
lf presco
{ Presco RFIDs... }
| command | offline | description | 
|---|---|---|
| lf presco help          | Y | This help | 
| lf presco read          | N | Attempt to read and Extract tag data | 
| lf presco clone         | N | clone presco tag to T55x7 (or to q5/T5555) | 
| lf presco sim           | N | simulate presco tag | 
lf pyramid
{ Farpointe/Pyramid RFIDs... }
| command | offline | description | 
|---|---|---|
| lf pyramid help         | Y | this help | 
| lf pyramid demod        | Y | demodulate a Pyramid FSK tag from the GraphBuffer | 
| lf pyramid read         | N | attempt to read and extract tag data | 
| lf pyramid clone        | N | clone pyramid tag to T55x7 (or to q5/T5555) | 
| lf pyramid sim          | N | simulate pyramid tag | 
lf securakey
{ Securakey RFIDs... }
| command | offline | description | 
|---|---|---|
| lf securakey help       | Y | This help | 
| lf securakey demod      | Y | Demodulate an Securakey tag from the GraphBuffer | 
| lf securakey read       | N | Attempt to read and extract tag data from the antenna | 
| lf securakey clone      | N | clone Securakey tag to T55x7 | 
| lf securakey sim        | N | simulate Securakey tag | 
lf ti
{ TI CHIPs... }
| command | offline | description | 
|---|---|---|
| lf ti help              | Y | This help | 
| lf ti demod             | Y | Demodulate raw bits for TI-type LF tag from the GraphBuffer | 
| lf ti read              | N | Read and decode a TI 134 kHz tag | 
| lf ti write             | N | Write new data to a r/w TI 134 kHz tag | 
lf t55xx
{ T55xx CHIPs... }
| command | offline | description | 
|---|---|---|
| lf t55xx help           | Y | This help | 
| lf t55xx bruteforce     | N | <start password> <end password> Simple bruteforce attack to find password | 
| lf t55xx config         | Y | Set/Get T55XX configuration (modulation, inverted, offset, rate) | 
| lf t55xx chk            | N | Check passwords from dictionary/flash | 
| lf t55xx clonehelp      | N | Shows the available clone commands | 
| lf t55xx dangerraw      | N | Sends raw bitstream. Dangerous, do not use!! b <bitstream> t <timing> | 
| lf t55xx detect         | Y | [1] Try detecting the tag modulation from reading the configuration block. | 
| lf t55xx deviceconfig   | N | Set/Get T55XX device configuration (startgap, writegap, write0, write1, readgap | 
| lf t55xx dump           | N | [password] [o] Dump T55xx card Page 0 block 0-7. Optional [password], [override] | 
| lf t55xx restore        | N | f <filename> [p <password>] Restore T55xx card Page 0 / Page 1 blocks | 
| lf t55xx info           | Y | [1] Show T55x7 configuration data (page 0/ blk 0) | 
| lf t55xx p1detect       | N | [1] Try detecting if this is a t55xx tag by reading page 1 | 
| lf t55xx protect        | N | Password protect tag | 
| lf t55xx read           | N | b <block> p [password] [o] [1] -- Read T55xx block data. Optional [p password], [override], [page1] | 
| lf t55xx resetread      | N | Send Reset Cmd then lf read the stream to attempt to identify the start of it (needs a demod and/or plot after) | 
| lf t55xx recoverpw      | N | [password] Try to recover from bad password write from a cloner. Only use on PW protected chips! | 
| lf t55xx special        | N | Show block changes with 64 different offsets | 
| lf t55xx trace          | Y | [1] Show T55x7 traceability data (page 1/ blk 0-1) | 
| lf t55xx wakeup         | N | Send AOR wakeup command | 
| lf t55xx wipe           | N | [q] Wipe a T55xx tag and set defaults (will destroy any data on tag) | 
| lf t55xx write          | N | b <block> d <data> p [password] [1] -- Write T55xx block data. Optional [p password], [page1] | 
lf viking
{ Viking RFIDs... }
| command | offline | description | 
|---|---|---|
| lf viking help          | Y | This help | 
| lf viking demod         | Y | Demodulate a Viking tag from the GraphBuffer | 
| lf viking read          | N | Attempt to read and Extract tag data from the antenna | 
| lf viking clone         | N | clone Viking tag to T55x7 (or to q5/T5555) | 
| lf viking sim           | N | simulate Viking tag | 
lf visa2000
{ Visa2000 RFIDs... }
| command | offline | description | 
|---|---|---|
| lf visa2000 help        | Y | This help | 
| lf visa2000 demod       | Y | demodulate an VISA2000 tag from the GraphBuffer | 
| lf visa2000 read        | N | attempt to read and extract tag data from the antenna | 
| lf visa2000 clone       | N | clone Visa2000 tag to T55x7 (or to q5/T5555) | 
| lf visa2000 sim         | N | simulate Visa2000 tag | 
mem
{ Flash Memory manipulation... }
| command | offline | description | 
|---|---|---|
| mem help                | Y | This help | 
| mem spiffs              | N | High level SPI FileSystem Flash manipulation [rdv40] | 
| mem spibaud             | N | Set Flash memory Spi baudrate [rdv40] | 
| mem info                | N | Flash memory information [rdv40] | 
| mem load                | N | Load data into flash memory [rdv40] | 
| mem dump                | N | Dump data from flash memory [rdv40] | 
| mem wipe                | N | Wipe data from flash memory [rdv40] | 
reveng
{ CRC calculations from RevEng software }
sc
{ Smart card ISO-7816 commands... }
| command | offline | description | 
|---|---|---|
| sc help                 | Y | This help | 
| sc list                 | N | List ISO 7816 history | 
| sc info                 | N | Tag information | 
| sc reader               | N | Act like an IS07816 reader | 
| sc raw                  | N | Send raw hex data to tag | 
| sc upgrade              | Y | Upgrade sim module firmware | 
| sc setclock             | N | Set clock speed | 
| sc brute                | N | Bruteforce SFI | 
script
{ Scripting commands }
| command | offline | description | 
|---|---|---|
| script help             | Y | This help | 
| script list             | Y | List available scripts | 
| script run              | Y | <name> -- Execute a script | 
trace
{ Trace manipulation... }
| command | offline | description | 
|---|---|---|
| trace help              | Y | This help | 
| trace list              | Y | List protocol data in trace buffer | 
| trace load              | Y | Load trace from file | 
| trace save              | Y | Save trace buffer to file | 
usart
{ USART commands... }
| command | offline | description | 
|---|---|---|
| usart help              | Y | This help | 
| usart btpin             | N | Change BT add-on PIN | 
| usart btfactory         | N | Reset BT add-on to factory settings | 
| usart tx                | N | Send string over USART | 
| usart rx                | N | Receive string over USART | 
| usart txrx              | N | Send string over USART and wait for response | 
| usart txhex             | N | Send bytes over USART | 
| usart rxhex             | N | Receive bytes over USART | 
| usart config            | N | Configure USART | 
wiegand
{ Wiegand format manipulation... }
| command | offline | description | 
|---|---|---|
| wiegand help            | Y | This help | 
| wiegand list            | Y | List available wiegand formats | 
| wiegand encode          | Y | Convert  | 
| wiegand decode          | Y | Convert raw hex to wiegand format |