proxmark3/doc/cheatsheet.md

Command Cheat Sheet

Generic	Low Frequence 125 kHz	High Frequence 13.56 MHz
Generic	T55XX	Mifare
Data	HID Prox	iClass
Memory	Indala
Sim Module	Hitag
Lua Scripts
Smart Card
Wiegand convertion

Generic

^Top

Identify High Frequency cards

pm3 --> hf search

Identify Low Frequency cards

pm3 --> lf search

Measure antenna characteristics, LF/HF voltage should be around 20-45+ V

pm3 --> hw tune

Check versioning

pm3 --> hw version

Check overall status

pm3 --> hw status

iClass

^Top

Reverse permute iClass master key

Options
---
r          reverse permuted key

pm3 --> hf iclass permute r 3F90EBF0910F7B6F

iClass Reader

pm3 --> hf iclass reader

Dump iClass card contents

Options
---
k <Key>      : *Access Key as 16 hex symbols or 1 hex to select key from memory

m3 --> hf iclass dump k 0

Read iClass Block

Options
---
b <Block>  : The block number as 2 hex symbols
k <Key>    : Access Key as 16 hex symbols or 1 hex to select key from memory

pm3 --> hf iclass rdbl b 7 k 0

Write to iClass Block

Options
---
b <Block>  : The block number as 2 hex symbols
d <data>   : Set the Data to write as 16 hex symbols
k <Key>    : Access Key as 16 hex symbols or 1 hex to select key from memory

pm3 --> hf iclass wrbl b 07 d 6ce099fe7e614fd0 k 0

Print keystore

Options
---
p           : print keys loaded into memory

pm3 --> hf iclass managekeys p

Add key to keystore [0-7]

Options
---
n <keynbr>    : specify the keyNbr to set in memory
k <key>       : set a key in memory

pm3 --> hf iclass managekeys n 0 k AFA785A7DAB33378

Encrypt iClass Block

pm3 --> hf iclass encrypt 0000000f2aa3dba8

Load iClass dump into memory for simulation

Options
---
f <filename>     : load iclass tag-dump filename

pm3 --> hf iclass eload f hf-iclass-db883702f8ff12e0.bin

Simulate iClass

Options
---
0 <CSN>     simulate the given CSN
2           Runs part 1 of LOCLASS attack
1           simulate default CSN
3           Full simulation using emulator memory (see 'hf iclass eload')

pm3 --> hf iclass sim 3

Clone iClass Legacy Sequence

pm3 --> hf iclass rdbl b 7 k 0
pm3 --> hf iclass wrbl b 7 d 6ce099fe7e614fd0 k 0

Simulate iClass Sequence

pm3 --> hf iclass dump k 0
pm3 --> hf iclass eload f hf-iclass-db883702f8ff12e0.bin
pm3 --> hf iclass sim 3

Extract custom iClass key (loclass attack)

Options
---
f <filename>   : specify a filename to clone from
k <Key>        : Access Key as 16 hex symbols or 1 hex to select key from memory
e              : If 'e' is specified, elite computations applied to key

pm3 --> hf iclass sim 2
pm3 --> hf iclass loclass f iclass_mac_attack.bin
pm3 --> hf iclass dump k <Kcus> e

Verify custom iClass key

Options
---
f <filename> : Dictionary file with default iclass keys
u            : CSN
p            : EPURSE
m            : macs
e            : elite

pm3 --> hf iclass lookup u 010a0ffff7ff12e0 p feffffffffffffff m 66348979153c41b9 f iclass_default_keys e

Mifare

^Top

Check for default keys

Options
---
<*card memory> <key type (A/B/?)> [t|d|s|ss] <dic (*.dic)>
*              : all sectors
card memory    : 0 - MINI(320 bytes), 1 - 1K, 2 - 2K, 4 - 4K
d              : write keys to binary file

pm3 --> hf mf chk *1 ? d mfc_default_keys

Check for default keys from local memory

Options
---
card memory   : 0 - MINI(320 bytes), 1 - 1K, 2 - 2K, 4 - 4K
m             : use dictionary from flashmemory

pm3 --> hf mf fchk 1 m

Dump Mifare card contents

Options
---
<card memory> : 0 = 320 bytes (Mifare Mini), 1 = 1K (default), 2 = 2K, 4 = 4K
k <name>      : key filename, if no <name> given, UID will be used as filename"
f <name>      : data filename, if no <name> given, UID will be used as filename

pm3 --> hf mf dump 1
pm3 --> hf mf dump 1 k hf-mf-A29558E4-key.bin f hf-mf-A29558E4-data.bin

Convert .bin to .eml

Options
---
i <file>     : Specifies the dump-file (input). If omitted, 'dumpdata.bin' is used

pm3 --> script run dumptoemul -i dumpdata.bin

Write to Mifare block

Options
---
<block number> <key A/B> <key (12 hex symbols)> <block data (32 hex symbols)>

pm3 --> hf mf wrbl 0 A FFFFFFFFFFFF d3a2859f6b880400c801002000000016

Run autopwn

Options
---

pm3 --> hf mf autopwn

Run Hardnested attack

Options
---
<block number> <key A|B> <key (12 hex symbols)> <target block number> <target key A|B> [known target key (12 hex symbols)] [w] [s]
w          : Acquire nonces and write them to binary file nonces.bin

pm3 --> hf mf hardnested 0 A 8829da9daf76 0 A w

Load Mifare emul dump file into memory for simulation

Options
---
<card memory> <file name w/o `.eml`>
[card memory]: 0 = 320 bytes (Mifare Mini), 1 = 1K (default), 2 = 2K, 4 = 4K, u = UL

pm3 --> hf mf eload hf-mf-353C2AA6
pm3 --> hf mf eload 1 hf-mf-353C2AA6

Simulate Mifare

u     : (Optional) UID 4,7 or 10 bytes. If not specified, the UID 4B from emulator memory will be used

pm3 --> hf mf sim u 353c2aa6

Simulate Mifare Sequence

pm3 --> hf mf chk *1 ? d mfc_default_keys
pm3 --> hf mf dump 1
pm3 --> script run dumptoemul -i dumpdata.bin
pm3 --> hf mf eload 353C2AA6
pm3 --> hf mf sim u 353c2aa6

Clone Mifare 1K Sequence

pm3 --> hf mf chk *1 ? d mfc_default_keys
pm3 --> hf mf dump
pm3 --> hf mf restore 1 u 4A6CE843 k hf-mf-A29558E4-key.bin f hf-mf-A29558E4-data.bin

Wiegand manipulation

^Top

List all available weigand formats in client

pm3 --> wiegand list

Convert Site & Facility code to Wiegand raw hex

Options
---
w <format> o <OEM> f <FC> c <CN> i <issuelevel>
w            : wiegand format to use
o            : OEM number / site code
f            : facility code
c            : card number
i            : issue level

pm3 --> wiegand encode 0 56 150

Convert Site & Facility code from Wiegand raw hex to numbers

Options
---
p            : ignore parity errors

pm3 --> wiegand decode 2006f623ae

HID Prox

^Top

Read HID Prox card

pm3 --> lf hid read

Demodulate HID Prox card

pm3 --> lf hid demod

Simulate Prox card

pm3 --> lf hid sim 200670012d

Clone Prox to T5577 card

pm3 --> lf hid clone 200670012d

Brute force HID reader

Options
---
a <format>        :  26|33|34|35|37|40|44|84
f <facility-code> :  8-bit value HID facility code
c <cardnumber>    :  (optional) cardnumber to start with, max 65535
d <delay>         :  delay betweens attempts in ms. Default 1000ms
v                 :  verbose logging, show all tries

pm3 --> lf hid brute a 26 f 224
pm3 --> lf hid brute v a 26 f 21 c 200 d 2000

Indala

^Top

Read Indala card

pm3 --> lf indala read

Demodulate Indala card

pm3 --> lf indala demod

Simulate Indala card

Options
---
<uid> :  64/224 UID

pm3 --> lf indala sim a0000000c2c436c1

Clone to T55x7 card

Options
---
<uid> :  64/224 UID

pm3 --> lf indala clone a0000000c2c436c1

Hitag

^Top

Read Hitag information

pm3 --> lf hitag info

Act as Hitag reader

Options
---
HitagS:
01 <nr> <ar>    : Read all pages, challenge mode
02 <key>        : Read all pages, crypto mode. Set key=0 for no auth

Hitag2:
21 <password>   : Read all pages, password mode. Default: 4D494B52 ("MIKR")
22 <nr> <ar>    : Read all pages, challenge mode
23 <key>        : Read all pages, crypto mode. Key format: ISK high + ISK low. Default: 4F4E4D494B52 ("ONMIKR")
25              : Test recorded authentications
26              : Just read UID

pm3 --> lf hitag 26
pm3 --> lf hitag 21 4D494B52

Sniff Hitag traffic

pm3 --> lf hitag sniff
pm3 --> lf hitag list

Simulate Hitag

pm3 --> lf hitag sim c378181c_a8f7.ht2

Write to Hitag block

Options
---
HitagS:
03 <nr,ar> <page> <byte0...byte3>     : Write page, challenge mode
04 <key> <page> <byte0...byte3>       : Write page, crypto mode. Set key=0 for no auth

Hitag2:
24  <key> <page> <byte0...byte3>      : Write page, crypto mode. Key format: ISK high + ISK low.
27  <password> <page> <byte0...byte3> : Write page, password mode. Default: 4D494B52 ("MIKR")

pm3 --> lf hitag writer 24 499602D2 1 00000000

Simulate Hitag2 sequence

pm3 --> lf hitag reader 21 56713368
pm3 --> lf hitag sim c378181c_a8f7.ht2

T55XX

^Top

Detect T55XX card

pm3 --> lf t55xx detect

Configure modulation

Options
---
<FSK|FSK1|FSK1a|FSK2|FSK2a|ASK|PSK1|PSK2|NRZ|BI|BIa>  : Set modulation
EM is ASK
HID Prox is FSK
Indala is PSK

pm3 --> lf t55xx config FSK

Set timings to default

Options
---
p            : persist to flashmemory
z            : Set default t55x7 timings (use p to save if required)

pm3 --> lf t55xx deviceconfig z p

Write to T55xx block

b <block>    : block number to write. Between 0-7
d <data>     : 4 bytes of data to write (8 hex characters)

pm3 --> lf t55xx wr b 0 d 00081040

Wipe a T55xx tag and set defaults

pm3 --> lf t55xx wipe

Data

^Top

Get raw samples [512-40000]

pm3 --> data samples <size>

Save samples to file

pm3 --> data save <filename>

Load samples from file

pm3 --> data load <filename>

Lua Scripts

^Top

List Lua Scripts

pm3 --> script list

Convert .bin to .eml

Options
---
i <file>    : Specifies the dump-file (input). If omitted, 'dumpdata.bin' is used

pm3 --> script run dumptoemul -i xxxxxxxxxxxxxx.bin

Format Mifare card

Options
---
k <key>       : the current six byte key with write access
n <key>       : the new key that will be written to the card
a <access>    : the new access bytes that will be written to the card
x             : execute the commands aswell.

pm3 --> script run formatMifare -k FFFFFFFFFFFF -n FFFFFFFFFFFF -x

Memory

^Top

Load default keys into memory

Options
---
o <offset>         : offset in memory
f <filename>       : file name
m                  : upload 6 bytes keys (mifare key dictionary)
i                  : upload 8 bytes keys (iClass key dictionary)
t                  : upload 4 bytes keys (pwd dictionary)

pm3 --> mem load f mfc_default_keys m
pm3 --> mem load f t55xx_default_pwds t
pm3 --> mem load f iclass_default_keys i

Sim Module

^Top

Upgrade Sim Module firmware

pm3 --> sc upgrade f ../tools/simmodule/sim011.bin

Smart Card

^Top

Get Smart Card Information

pm3 --> sc info

Act like an IS07816 reader

pm3 --> sc reader

Set clock speed

Options
---
c <speed>       : clockspeed (0 = 16MHz, 1=8MHz, 2=4MHz)

pm3 --> sc setclock c 2

Send raw hex data

Options
---
r           : do not read response
a           : active smartcard without select (reset sc module)
s           : active smartcard with select (get ATR)
t           : executes TLV decoder if it possible
0           : use protocol T=0
d <bytes>   : bytes to send

pm3 --> sc raw s 0 d 00a404000e315041592e5359532e4444463031 : 1PAY.SYS.DDF01 PPSE directory with get ATR
pm3 --> sc raw 0 d 00a404000e325041592e5359532e4444463031   : 2PAY.SYS.DDF01 PPSE directory
pm3 --> sc raw 0 t d 00a4040007a0000000041010               : Mastercard
pm3 --> sc raw 0 t d 00a4040007a0000000031010               : Visa

Bruteforce SPI

Options
---
t          : executes TLV decoder if it possible

pm3 --> sc brute
pm3 --> sc brute t