mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-09-23 00:37:14 +08:00
101 lines
3.3 KiB
Markdown
101 lines
3.3 KiB
Markdown
# External resources
|
|
|
|
You might want to follow one of these external resources to get an overview, but please still read carefully this page as some instructions may have evolved.
|
|
|
|
* [Kali Video Installation guide](https://youtu.be/t5eBPS6lV3E "Kali Linux Installation Tutorial")
|
|
* [Ubuntu Video Installation guide](https://youtu.be/DThmkH8CdMo "Ubuntu Installation Tutorial")
|
|
* [ParrotOS Video Installation guide](https://youtu.be/Wl9AsrU4igo "ParrotOS Installation Tutorial")
|
|
|
|
|
|
|
|
* ParrotOS: some further notes can be found at @5w0rdfish repo [Proxmark Installation for Parrot OS](https://github.com/5w0rdfish/Proxmark3-RDV4-ParrotOS)
|
|
|
|
|
|
# Install the required dependencies
|
|
|
|
## On Debian / Ubuntu / Kali / ParrotOS / Raspbian
|
|
|
|
First what we want to do is get an update for the system. If you need to upgrade do this **before** the install. An upgrade was carried out prior to following these instructions.
|
|
|
|
Update the packages list
|
|
```sh
|
|
sudo apt-get update
|
|
```
|
|
Install the requirements
|
|
|
|
```sh
|
|
sudo apt-get install --no-install-recommends git ca-certificates build-essential pkg-config \
|
|
libreadline-dev gcc-arm-none-eabi libnewlib-dev qtbase5-dev
|
|
```
|
|
|
|
If you don't need the graphical components of the Proxmark3 client, you can skip the installation of `qtbase5-dev`.
|
|
|
|
If you get some (non blocking) error at runtime such as _Gtk-Message: Failed to load module "canberra-gtk-module"_ you may have to install `libcanberra-gtk-module`.
|
|
|
|
## On ArchLinux
|
|
|
|
```sh
|
|
sudo pacman -Sy base-devel readline arm-none-eabi-gcc arm-none-eabi-newlib git --needed
|
|
```
|
|
If you want graphical output (such as in `hw tune`):
|
|
```sh
|
|
sudo pacman -Su qt5-base
|
|
```
|
|
|
|
## On Fedora
|
|
|
|
```sh
|
|
sudo dnf install git make gcc gcc-c++ arm-none-eabi-gcc-cs arm-none-eabi-newlib readline-devel qt5-qtbase-devel libatomic
|
|
```
|
|
|
|
If you don't need the graphical components of the Proxmark3 client, you can skip the installation of `qt5-qtbase-devel`.
|
|
|
|
# Clone the RRG/Iceman repository
|
|
|
|
```sh
|
|
git clone https://github.com/RfidResearchGroup/proxmark3.git
|
|
```
|
|
|
|
# Check ModemManager
|
|
|
|
### ⚠️ Very important ⚠️
|
|
make sure ModemManager will not interfer, otherwise it could brick your Proxmark3!
|
|
Read carefully [this page about ModemManager](ModemManager-Must-Be-Discarded.md) and follow its instructions.
|
|
|
|
# Check connection
|
|
|
|
Check the proxmark is being picked up by your computer. Plug it in, then:
|
|
|
|
```sh
|
|
sudo dmesg | grep -i usb
|
|
```
|
|
It should show up as a CDC device:
|
|
```
|
|
usb 2-1.2: Product: PM3
|
|
usb 2-1.2: Manufacturer: proxmark.org
|
|
cdc_acm 2-1.2:1.0: ttyACM0: USB ACM device
|
|
```
|
|
And a new `/dev/ttyACM0` should have appeared.
|
|
|
|
# Get permissions to use /dev/ttyACM0
|
|
|
|
Add current user to the proper group to get permission to use `/dev/ttyACM0`.
|
|
|
|
This step can be done from the RRG/Iceman Proxmark3 repo with:
|
|
|
|
```sh
|
|
make accessrights
|
|
```
|
|
|
|
Then, you *need* to logout and login in again for your new group membership to be fully effective.
|
|
|
|
To test you have the proper read & write rights, plug the Proxmark3 and execute:
|
|
```sh
|
|
[ -r /dev/ttyACM0 ] && [ -w /dev/ttyACM0 ] && echo ok
|
|
```
|
|
It must return `ok`. Otherwise this means you've a permissions problem to fix.
|
|
|
|
# Compile and use the project
|
|
|
|
Now you're ready to follow the [compilation instructions](/doc/md/Use_of_Proxmark/0_Compilation-Instructions.md).
|