* switch to argtable command line parsing (i.e. options must now be preceded by '-')
* add option '-r' to display relative times
* add option '-u' to display times in microseconds
* fix: graceful exit if trace is requested from offline PM3
* add loooong timeout for UPDATE command
* add flags FLAG_ICLASS_READER_INIT and FLAG_ICLASS_READER_CLEARTRACE
* don't overwrite trace buffer during 'hf iclass dump'
* fix long waiting time when start_time==0 in TransmitTo15693Tag()
* remove some additional debug prints
* refactoring: move helper functions from protocols.c to cmdhficlass.c
* add 'h' and '1' options to 'hf iclass reader' (from RRG repository)
* use correct key when only CreditKey is given in 'hf iclass dump'
* separate select_and_auth
* DropField() on errors
* dump last block in 'hf iclass dump'
* display correct memory size (number of blocks) in 'hf iclass reader' and dump
* more whitespace fixes
fix 'hf iclass reader'
* code deduplication. Use functions from iso15693.c
* speedup CodeIso15693AsReader()
* invert reader command coding. 0 now means 'unmodulated' ( = field on)
* decode SOF only as a valid tag response in Handle15693SamplesFromTag()
* complete decoding of EOF in Handle15693SamplesFromTag()
* determine and write correct times to trace
* FPGA-change: generate shorter frame signal to allow proper sync in StartCountSspClk()
* modify StartCountSspClk() for 16bit SSC transfers
* whitespace in util.c
* add specific LogTrace_ISO15693() with scaled down duration. Modify cmdhflist.c accordingly.
* allow 'hf 15 raw' with single byte commands
* check for buffer overflow, card timeout and single SOF in 'hf 15 raw'
* decode and handle SOF only responses in Handle14443bSamplesDemod()
* allow 1 byte commands with 'hf 14b raw'
* don't do READCHECK when not trying to authenticate
* standard LED handling
* remove unused FLAG_ICLASS_READER_ONLY_ONCE and FLAG_ICLASS_READER_ONE_TRY
* sanity check for negative times in TransmitTo15693Tag()
* increase reader timeout for 'hf 15' functions to be enough for slot 7 answers to ACTALL
* add 'hf iclass permute' inspired by RRG repository
* whitespace in cmdhficlass.c
* don't do READCHECK when not trying to authenticate
* standard LED handling
* remove unused FLAG_ICLASS_READER_ONLY_ONCE and FLAG_ICLASS_READER_ONE_TRY
* sanity check for negative times in TransmitTo15693Tag()
* increase reader timeout for 'hf 15' functions to be enough for slot 7 answers to ACTALL
* add 'hf iclass permute' inspired by RRG repository
* whitespace fixes
* code deduplication. Use functions from iso15693.c
* speedup CodeIso15693AsReader()
* invert reader command coding. 0 now means 'unmodulated' ( = field on)
* decode SOF only as a valid tag response in Handle15693SamplesFromTag()
* complete decoding of EOF in Handle15693SamplesFromTag()
* determine and write correct times to trace
* FPGA-change: generate shorter frame signal to allow proper sync in StartCountSspClk()
* modify StartCountSspClk() for 16bit SSC transfers
* whitespace in util.c
* add specific LogTrace_ISO15693() with scaled down duration. Modify cmdhflist.c accordingly.
* allow 'hf 15 raw' with single byte commands
* check for buffer overflow, card timeout and single SOF in 'hf 15 raw'
fix hf iclass sim:
* sim 2: add responses to read(1) (Config) and read(5) (AIA)
* sim 2/3: don't restrict CC to 00 bytes only
* sim 3: add responding to read block commands
* sim 2/3: add responding to READ_CHECK_KC
* fix sizes of pre-encoded tag answers
* sim 2: change default card challenge
* remove commented code
* use #defines instead of numerical constants for simulation modes
* some reformatting and whitespace fixes
* fix debug print on unhandled commands
* deduplicate: use sim functions from iso15693.c
* fix times in tracelog and 'hf list iclass' (sim only)
* don't check parity in 'hf list iclass'
* fix timing in TransmitTo15693Reader()
* add simulation of block 3 and 4 (Kd and Kc) reads
* add simulation of READ4 (4 blocks read)
* FPGA change (hi_simulate.v): avoid spp_clk phase changes
* chg to reader command decoder in iso15693.c (require no modulation before SOF)
* add 'has_been_low_for' logic to hi_simulate.v (same as in other FPGA modes, default to "no modulation")
* add simulation of chip status (IDLE, ACTIVE, SELECTED, HALTED)
* check ACSN on SELECT
* add simulation of RESELECT
* always check length of reader commands
* fix printing of NR, MAC in sim 2 mode
* fix response length to CHECK command
* implement UPDATE and CHECK[Kc]
* add simulation of multiple pages (PAGESEL by @sherhannn9)
* maintain cipher states per page
* update cipher state after UPDATE commands (@sherhannn9)
* add simulation of personalization mode
* respond with SOF on HALT
* display "\<SOF\>" instead of "0f" in 'hf list iclass'
* standard LED handling
* speedup CodeIso15693AsTag()
* TransmitTo15693Tag(): don't send unmodulated start of SOF
* reduce modulation depth in hi_simulate.v
* fix tag response timing. iClass differs from ISO15693 in this respect.
* speedup CodeIso15693AsTag()
* TransmitTo15693Tag(): don't send unmodulated start of SOF
* reduce modulation depth in hi_simulate.v
* calculate CRC for configuration block when simulating
* Show real response time instead of planned response time in 'hf list iclass'
* add simulation of multiple pages (PAGESEL by @sherhannn9)
* maintain cipher states per page
* update cipher state after UPDATE commands (@sherhannn9)
* add simulation of personalization mode
* respond with SOF on HALT
* display "<SOF>" instead of "0f" in 'hf list iclass'
* standard LED handling
* chg to reader command decoder in iso15693.c (require no modulation before SOF)
* add 'has_been_low_for' logic to hi_simulate.v (same as in other FPGA modes, default to "no modulation")
* add simulation of chip status (IDLE, ACTIVE, SELECTED, HALTED)
* check ACSN on SELECT
* add simulation of RESELECT
* always check length of reader commands
* fix printing of NR, MAC in sim 2 mode
* fix response length to CHECK command
* fix debug print on unhandled commands
* deduplicate: use sim functions from iso15693.c
* fix times in tracelog and 'hf list iclass' (sim only)
* don't check parity in 'hf list iclass'
* fix timing in TransmitTo15693Reader()
* (PRs 233, 303, 304 by @ViRb3 on https://github.com/RfidResearchGroup/proxmark3)
* replace byte_t by uint8_t
* note that Hitag1 commands are not yet available
* whitespace fixes
* #define Hitag2 commands
* whitespace
* add EOF wait time
* add powerup wait time
* don't repeatedly clear trace while running (PR 243 by @mceloff from https://github.com/RfidResearchGroup/proxmark3)
* standard LED handling
* better check for key file syntax
* get rid of "res" column when printing the result. Show unknown keys more prominent as " ? "
* add support for elliptic curve 'secp128r1' to mbedtls library
* change ecdsa_signature_verify() to allow different curves, signature lengths, and skipping hash
* add another public key for Mifare Ultralight EV1
