Philippe Teuwen
a95ff04392
Fix mem leak in flash mem read
2019-03-13 12:46:03 +01:00
Philippe Teuwen
61905d2b19
lfops: add ledcontrol in API
2019-03-12 23:51:30 +01:00
Philippe Teuwen
2c41a61ee3
remove always true cond
2019-03-12 22:52:15 +01:00
Philippe Teuwen
d50de828a1
flash write: check first page write
2019-03-12 22:50:29 +01:00
iceman1001
35bc4a975e
rename SNOOP -> SNIFF
2019-03-12 13:15:39 +01:00
Philippe Teuwen
961d929f4d
changing {} style to match majority of previous style
2019-03-10 11:20:22 +01:00
Philippe Teuwen
0373696662
make style
2019-03-10 00:00:59 +01:00
Philippe Teuwen
8a7c6825b5
armsrc: fix mix of spaces & tabs
2019-03-09 20:34:41 +01:00
Philippe Teuwen
60f292b18e
remove spurious spaces & tabs at end of lines
2019-03-09 08:59:13 +01:00
vratiskol
99dc51e005
Mem Leak
2019-02-24 22:02:09 +01:00
iceman1001
f215ebef80
Refactored 'lf t55xx brute', split it up into two commands.
...
- lf t55xx brute (tries bruteforcing a range of pwds
- lf t55xx chk (uses dictionary file or RDV4 flashmem)
FIX: adjust lf sim (@marshmellow42) see 7008cf9c15
"attempt to speed up the loops waiting for carrier signal to go high or low
by only checking for a halt (button press or usbpol) every 256th loop
iteration. some users were experiencing modulating reactions to be too slow.
ADD: 'lf t55xx chk'
It uses @marshmellows42 idea behind commit (6178b085a0
)
With calculating a baseline (read block0 32times and average the signal-ish) and sampling only 1024 signal data. The algo then proceeds to calc the average and keep track of the candidate which is given the most difference in signal data average value. I do some squaring and shifting for this.
The candidate is then send back to client to be tested properly with trymodulation like before.
This seems to work good on t55xx card which has a ASK configuration.
WORK-IN-PROGRESS
2019-01-11 14:46:27 +01:00
iceman1001
0dee369a58
FIX: 'hf tune' - now works...
2019-01-06 20:28:23 +01:00
iceman1001
0fb0c35308
CHG: 'mem load' - the possibility to upload default_iclass_keys.dic, default_keys.dic, default_pwd.dic to predefined flashmemory sections. These will be used in pwd / key checking algorithms on device.
...
CHG: 'script run read_pwd_mem.lua' - script now can print those uploaded dictionary files.
How to upload
pm3 --> mem load f default_iclass_keys i
pm3 --> mem load f default_keys m
pm3 --> mem load f default_pwd t
How to validate / view
PM3 -->scr run read_pwd_mem -o 237568 -k 8
pm3 -->scr run read_pwd_mem -o 241664 -k 6
pm3 -->scr run read_pwd_mem -o 245760 -k 4
2019-01-01 18:01:40 +01:00
Chris
f8c33af1da
CHG: FPC connector tests. Device -> Client communications works.
...
Adjust armsrc/Makefile and client/Makefile to include the -DWITH_FPC flag to compile with FPC enabled.
2018-11-20 10:58:32 +01:00
Chris
aa3b322d0f
chg: 'analyze a' - some fpc test changes.
2018-11-16 23:59:14 +01:00
Chris
fd1c0cac79
FIX: 'standalone mode MattyRun' - compiles and should even work
...
CHG: 'standalone mode' - generic banner for each mode. Updated the ledshow to @cjbrigato
2018-11-16 02:52:42 +01:00
bogiton
34775c81f5
Added BogitoRun identification
2018-10-21 18:29:49 +00:00
bogiton
8079613b37
Add check for the HF_BOG directive for RunMod
2018-10-16 19:41:05 +00:00
Chris
dc67b5d7c9
chg: revert fpga_major mode in LF.
...
chg: 'lf t55xx deviceconfig' - persistence to flashmem is now option with param P
2018-09-23 05:29:55 +02:00
Chris
02cc278e19
chg: remove warnings on coverity
...
chg: encapsule flasmem function calls
2018-09-16 20:47:23 +02:00
Chris
ba2543b627
ADD: 'lf t55xx deviceconfig' - command that allows for setting t55xx timings via the client. If run on a RDV40, it also saves the config to flashmemory. This gives you option to have custom timings for your custom antenna in order for your RDV40 to work optimal against a t55xx tag and with your custom antenna. (@iceman)
2018-09-11 18:35:07 +02:00
Chris
24eaac8681
CHG: the thread comms refactoring from offical pm3 repo
...
chg: FPC com speed limited to 115200 when compiled with FPC
chg: USART remake (@drandreas)
2018-09-06 21:43:20 +02:00
RFID Research Group
eb0b5116a2
Merge pull request #25 from drandreas/rdv4-legic
...
Legic Tag Simulator
2018-09-06 20:26:39 +02:00
Colin J. Brigato
368fe11df0
Second Pass rewrite of flashmem. added command 'mem spibaud' to switch between 24/48Mhz operation. All is more consistant, less messy. All logic rewrittent avoiding multiple flashinit/flashstop. busywait is now at it's lowest possible. Beware : 48Mhz is VERY buggy cause of sillicon bug (see source for more info), and doesn't give much more than 24Mhz for now since we doubled nearly every operation speed here.
2018-09-06 05:15:52 +02:00
AntiCat
61e4eac2b2
Legic: Moved card simulator into separate file & cleaned interface.
...
Reader and card simulation have almost no common code. Moreover the sim
uses an SSP Clock at 212kHz for all timings to prevent any drifting from
the PRNG. This clock speed is not available in reader simulation mode (SSP
runs at up to 3.4MHz, and changes speed between TX and RX). For these
reasons having the code in separate files makes it significantly cleaner.
2018-09-05 23:03:04 +02:00
Colin J. Brigato
8d673fa1bf
First pass rewrite of flashmem driver for optimization. Lot of changes here. Provides PoC of saving and recalling a tag in Standalone mode. Added some printing passthrough to client to azccomodate for vt100 eye-candyness. FastREAD mode implemented for flashmem, testable from client. Beta but functionnal. Reading the whole flash with 1Kb to 32kb buffers was ~730ms, now 380ms Max (even at 24Mhz spi baudrate)
2018-09-03 00:02:44 +02:00
Chris
f1d0e9db4d
fix: revert back
2018-08-29 19:42:46 +02:00
Chris
42e883f67b
FIX: print_result - now prints correct len.
...
FIX: DOWNLOAD_BUFFER - now with correct result logic
2018-08-28 21:15:28 +02:00
Chris
5f77121694
initial commit to be in sync the-soon-defunct repo pm3rdv40.
2018-08-12 21:54:31 +02:00
Chris
bacf8aff0f
add: FPC connector skeleton usart. Not working but if will be a starting point for those who might want to help out with it.
2018-07-30 09:54:44 +02:00
iceman1001
4d8488e14b
CHG: https://github.com/Proxmark/proxmark3/pull/631 from offical repo. (piwi)
...
CHG: textual adjustments
2018-07-28 14:25:12 +02:00
Chris
79158c7360
chg; preparing for more cmds.
2018-07-06 00:24:04 +02:00
Chris
36d774506c
chg: 'sm raw' - implemented 'r' don't read reply
2018-07-05 21:10:21 +02:00
Chris
fca841122f
chg: 'sc reader' - hooked up atr.
2018-07-05 16:32:10 +02:00
Chris
ee006c6a7b
add: sc upgrade - beta test
2018-07-05 14:38:31 +02:00
Chris
e7342e7402
chg: 'sc upgr' shouldnt print too much
2018-07-05 11:37:04 +02:00
Chris
f70b8be5de
add: 'sc' - smart card commad [rdv40]
...
chg: test to read out firmware
2018-07-05 10:48:24 +02:00
Chris
3ecff83de2
chg: clean up
2018-07-04 15:29:27 +02:00
Chris
9571cf1d13
chg: and wrap FPC code with defines..
2018-07-04 13:05:23 +02:00
Chris
e09f9cbb32
add: RDV40 smart card module comms ( Thanks to @Willok! ) bitbanging i2c with it
2018-07-04 12:19:04 +02:00
iceman1001
501c29f76d
add: support for reading flashmem
2018-05-22 12:09:17 +02:00
iceman1001
6b7819276d
add: 'mem info' - rudamentary support for new command.
2018-05-06 09:26:06 +02:00
iceman1001
4cd72b95c5
fix: coverty scan #277726 , unsigned value comparision always true.
2018-05-03 20:36:01 +02:00
iceman1001
989b80007c
chg: removed debugstatements
2018-05-03 16:20:46 +02:00
iceman1001
e50fef6607
fix: 'mem load' - wrong offset when uploading
2018-05-03 16:10:38 +02:00
iceman1001
021c0a1349
ADD: 'mem' commands. For RDV40 devices only.
...
If you don't have one, comment out inside client/Makefile this line
CFLAGS += -DWITH_FLASH
2018-05-03 12:15:03 +02:00
iceman1001
207fa2b574
add: potential fix for OSX uses, by @piwi
...
chg: adapting fix to support iceman forks extended commands.
2018-05-02 08:11:29 +02:00
iceman1001
98f0e9a284
fix: print.c on device doesn't have support for formatter %f
2018-04-27 12:16:35 +02:00
iceman1001
6ab1b285a0
chg.
2018-04-20 19:50:56 +02:00
iceman1001
f5718fb448
chg: wiping / reading / writing flashmem
2018-04-20 16:11:10 +02:00