RfidResearchGroup/proxmark3
1
1
Fork 0
mirror of https://github.com/RfidResearchGroup/proxmark3.git synced 2025-02-15 19:59:34 +08:00
Code Issues Projects Releases Packages Wiki Activity
4147 commits 3 branches 15 tags 87 MiB
Commit graph

1249 commits

Author SHA1 Message Date
Chris
9ee550af45 FIX: lf t55xx detect works better with adjusted timings 
CHG: applied fpga_off patch.
 2018-09-10 21:45:00 +02:00
Chris
90f29bf430 chg: call specific noise function 2018-09-09 11:29:37 +02:00
Chris
ba9de80eeb chg: 'hf legic sim' break sim by sending another cmd 2018-09-09 11:29:11 +02:00
Chris
79afc031fc FIX: LF antenna discharge after interfer timings. As suggested by @ts And thanks to @drandreas who patiently explains fpga verilog code to me. 
This introduces a new majoe mode, FPGA_MAJOR_MODE_OFF_LF,  which should ONLY be used in sending loops for LF.   Basically the PWR_LO is set HIGH in order to discharge voltage faster.

Once sending is over,  the normal FPGA_MAJOR_MODE_OFF SHALL be used.
 2018-09-08 14:11:51 +02:00
Chris
e5e8c0b5d8 not needed anymore 2018-09-07 23:45:08 +02:00
Chris
24eaac8681 CHG: the thread comms refactoring from offical pm3 repo 
chg: FPC com speed limited to 115200 when compiled with FPC
chg: USART remake (@drandreas)
 2018-09-06 21:43:20 +02:00
RFID Research Group
eb0b5116a2
Merge pull request #25 from drandreas/rdv4-legic 
Legic Tag Simulator
 2018-09-06 20:26:39 +02:00
Colin J. Brigato
7e12fc0ceb Pass 2; commit 3/3; 2018-09-06 05:34:48 +02:00
Colin J. Brigato
368fe11df0 Second Pass rewrite of flashmem. added command 'mem spibaud' to switch between 24/48Mhz operation. All is more consistant, less messy. All logic rewrittent avoiding multiple flashinit/flashstop. busywait is now at it's lowest possible. Beware : 48Mhz is VERY buggy cause of sillicon bug (see source for more info), and doesn't give much more than 24Mhz for now since we doubled nearly every operation speed here. 2018-09-06 05:15:52 +02:00
AntiCat
e1fa1e659a Legic: Implemented write command for card simulation 2018-09-05 23:03:05 +02:00
AntiCat
2981fe7ce8 Legic: Implemented read command for card simulation 2018-09-05 23:03:05 +02:00
AntiCat
cd78b00815 Legic: Implemented setup phase for card simulation 2018-09-05 23:03:05 +02:00
AntiCat
2c6c4e5bc6 Legic: Implemented trace log 2018-09-05 23:03:05 +02:00
AntiCat
fe91a3f52f Legic: Implemented RX and TX for card simulation 2018-09-05 23:03:05 +02:00
AntiCat
61e4eac2b2 Legic: Moved card simulator into separate file & cleaned interface. 
Reader and card simulation have almost no common code. Moreover the sim
uses an SSP Clock at 212kHz for all timings to prevent any drifting from
the PRNG. This clock speed is not available in reader simulation mode (SSP
runs at up to 3.4MHz, and changes speed between TX and RX). For these
reasons having the code in separate files makes it significantly cleaner.
 2018-09-05 23:03:04 +02:00
Colin J. Brigato
76e2d7502a Merge remote-tracking branch 'upstream/master' 2018-09-05 20:39:56 +02:00
Colin J. Brigato
2263c826db Restore Makefile, temporiraly provide Makefile.Colin 2018-09-05 20:34:28 +02:00
Chris
4c72acaf63 FIX: cleanup code, sync of output texts. 2018-09-05 18:58:58 +02:00
Chris
4c37126baf cleanup 2018-09-05 18:58:04 +02:00
def
b7bdc69e5a lfops.c CmdEM410xdemod empty TAG ID fix. 2018-09-05 17:50:31 +03:00
Chris
307063474d CHG: cleanup 2018-09-04 20:36:25 +02:00
Chris
ac6bd61544 FIX: longer t55xx timings to compensate for delay of field damping, and minor adjustments. 2018-09-04 20:35:29 +02:00
Chris
e12d22b6d9 FIX: 'LF Standalone modes' - Ensure that noise check is performed for any device-side processing otherwise device-side processing will see all LF signals as noise. 
From: 8bddce8096
 2018-09-04 20:32:52 +02:00
Chris
27a036b087 FIX: logic behind compiler directive is now correct 2018-09-04 20:31:12 +02:00
Iceman
701b96d7fe
Update readme.md 2018-09-03 22:45:01 +02:00
Chris
76e7603ef1 textual 2018-09-03 22:36:43 +02:00
Chris
0e3ba1c058 CHG: easier to configure compilation of standalone mode. Just swap -D directive once your new standalone mode is ready and you added your code for it 
based on a modification by @marshmellow42
 2018-09-03 22:27:18 +02:00
Colin J. Brigato
8d673fa1bf First pass rewrite of flashmem driver for optimization. Lot of changes here. Provides PoC of saving and recalling a tag in Standalone mode. Added some printing passthrough to client to azccomodate for vt100 eye-candyness. FastREAD mode implemented for flashmem, testable from client. Beta but functionnal. Reading the whole flash with 1Kb to 32kb buffers was ~730ms, now 380ms Max (even at 24Mhz spi baudrate) 2018-09-03 00:02:44 +02:00
Chris
f1d0e9db4d fix: revert back 2018-08-29 19:42:46 +02:00
Chris
42e883f67b FIX: print_result - now prints correct len. 
FIX: DOWNLOAD_BUFFER -  now with correct result logic
 2018-08-28 21:15:28 +02:00
Chris
ca5b476730 FIX: 'standanlonemode colin' - mifare1ksim called with correct params (@cjbrigato) 2018-08-26 08:19:59 +02:00
Chris
2eab02e3ba CHG: 'standalone mode MattyRun' - added some comments and suggestion 2018-08-25 23:26:04 +02:00
Chris
fe332a1f2b removed unneeded ramfunc attribute 2018-08-13 23:50:17 +02:00
Chris
91dea8d694 code clean. 2018-08-13 23:49:33 +02:00
Chris
5f77121694 initial commit to be in sync the-soon-defunct repo pm3rdv40. 2018-08-12 21:54:31 +02:00
Andreas Dröscher
9ba20b590a change: reduced demodulator to bare minimum 
The initial code added complexity without improving reading distance.
Thankfully the peak detection signal path has a low noise floor.
 2018-08-12 12:51:45 +02:00
Andreas Dröscher
0d0b651246 change: re-added trace log 2018-08-12 12:51:45 +02:00
Andreas Dröscher
ff5b046903 change: re-added status LEDs 
- LED_A: FPGA and 13.56MHz carrier is active
- LED_B: Reading Byte
- LED_C: Writing Byte
 2018-08-12 12:41:45 +02:00
Andreas Dröscher
e052fbc433 change: re-added legic write support 2018-08-12 12:41:45 +02:00
Andreas Dröscher
9d330dde87 fix: 32bit tick timer based on TC0 and TC1 
TC1 counts the number of TC0 overflows (carry bits).
In random conditions TC1 would return or stay at zero,
instead of counting up. This due to the behavior of the
reset signal.

SAM7S Series Datasheet, 33.5.6 Trigger:
Regardless of the trigger used, it will be taken into account
at the following active edge of the selected clock. This means
that the counter value can be read differently from zero just
after a trigger, especially when a low frequency signal is
selected as the clock.

The new code first prepares TC1 and asserts TC1 trigger and
then prepares TC0 and asserts TC0 trigger. The TC0 start-up
will reset TC1.
 2018-08-12 12:41:11 +02:00
Andreas Dröscher
c06f0af7f3 change: switched from timestamps (us) to ticks 
GetCountUS() has a jitter of +/- 7us this is not precise
enough to keep the PRNG in sync. 1.5 * GET_TICKS on the
other hand is spot on.
 2018-08-12 09:59:48 +02:00
Andreas Dröscher
e0adc976e0 change: added rx/tx coordination timestamp 2018-08-12 09:59:48 +02:00
Andreas Dröscher
7244f5825d change: legic reader tx back to bigbang 
I've tried to modulate the Legic specific pause-puls using ssc and the default
ssc clock of 105.4 kHz (bit periode of 9.4us) - previous commit. However,
the timing was not precise enough. By increasing the ssc clock this could
be circumvented, but the adventage over bitbang would be little.
 2018-08-12 09:59:48 +02:00
Andreas Dröscher
3029223158 change: legic reader now uses xcorrelation and ssc based io 
- Even tough legic tags transmit just AM using xcorrelation
   results in a significantly better signal quality.
 - Switching from bit bang to a hardware based ssc frees
   up CPU time for other tasks e.g. demodulation
 2018-08-12 09:59:48 +02:00
Andreas Dröscher
c59150657c add: xcorr 211.875 kHz option 
The FPGA supported this frequency for a long time, just the ARM code
had no define to enable it.
 2018-08-12 09:59:48 +02:00
Andreas Dröscher
db70ab8f7d change: remove broken legic simulator 
It will be rewritten in a later commit
 2018-08-12 09:59:48 +02:00
Andreas Dröscher
8a53137ab0 change: remove dead legic code 
This code was either disabled or never reached.
 2018-08-12 09:59:48 +02:00
Andreas Dröscher
e779f06c5e change: clean up Legic interface 
I see no adventage in poluting all sources that include legicrf.h
with our internal depedencies (includes) and function names.
 2018-08-12 09:59:48 +02:00
Iceman
c339035ec5
Revert "WIP: Clean Legic Reader" 2018-08-06 15:05:36 +02:00
Andreas Dröscher
058426fa17 change: added rx/tx coordination timestamp 2018-08-05 00:57:20 +02:00