I also made the SRi read functions better by combining them. The demodulation / uart code should be the same as last summers changes. The device side code can now be even smaller.
This function allows the user to specify APDUs which are sent to a card
supporting the PACE protocol. The response times are measured and
printed.
The code was pulled from the old Google Code repository (branch "epa")
and modified to fit into the new code base.
CHG: USB_CMD_DATA_SIZE is now used as maxsize for transfer of data between client and pm3device
CHG: suggested a fix for the underscore problem in ioclass\fileutils.c
ADD: tnp3xx support
ADD: nxp tag idents.
ADD: identifiction of chinese backdoor commands to hf 14a reader.
Applied PwPiwi's new parity fix.
Applied Marshmellw's fixes for FSKdemod (HID, IO)
FIX: a potential bigbuffer fault given pwpiwi's change inside lfops.c CmdIOdemodFSK & CmdHIDdemodFSK
FIX: change some "int" parameters to uint's.
FIX: changed the lfops.c - DoAcquisition125k_internal to respect pwpiwi's definitions of FREE_BUFFER_OFFSET
HEADS up: The ultralight functions hasn't been verified since pwpiwi's changes.
- buffers were too small to handle 256 byte frames
- parity bits were only handled for up to 32 byte frames
- trace format was inefficient
- removed parity calculation from decoders in iclass.c (parity not used on air anyway)
- enhanced tracing: hf 14a list now shows meaningful timing information. With new option f it also shows the frame delay times (fdt)
- small fix for hf 14b list - it used to run into the trace trailer
- hf 14a sim now obeys iso14443 timing (fdt of 1172 or 1234 resp.)
Note: you need to flash FPGA as well.
More details in http://www.proxmark.org/forum/viewtopic.php?pid=9721#p9721
- PM: used GetCountMifare in MifareNested() for improved timing accuracy and to deliver better quality nonces
- PM: MifareNested now delivers exactly two different nonces to avoid time consuming multiple lfsr_recovery32() on client side
- Client: replaced quicksort by bucketsort in crapto1.c which is faster
- Client: use multithreading (two parallel calls to lfsr_recovery32())
- Client: fixed a small bug in mfnested() (always showed trgkey=0)
- Client: introduced a mutex for PrintAndLog() to avoid interlaced printing
Minor rework of hf mf chk:
- Avoid time consuming off/on cycles. Send a "halt" instead.
This fixes the bug that the USB communication breaks when collecting PACE nonces with no delay. The delay functionality has not been removed (it doesn't hurt to keep it), but using a delay of 0 is now possible without a high risk of getting too many errors.
-new files armsrc/epa.[ch] for ePA (electronic "Personalausweis") related functions
-Offers elementary functions (EPA_PACE_MSE_Set_AT etc.)
-Also offers one new USB command: EPA_PACE_Collect_Nonce
-created new command subtree in client: client/hfepa.[ch] ("hf epa")
-offers "hf epa cnonces" (collect encrypted PACE nonces)
-more to come
