RfidResearchGroup/proxmark3
1
1
Fork 0
mirror of https://github.com/RfidResearchGroup/proxmark3.git synced 2024-09-21 15:56:21 +08:00
Code Issues Packages Projects Releases Wiki Activity
4091 commits 3 branches 14 tags 86 MiB
Commit graph

1228 commits

Author SHA1 Message Date
Chris 307063474d CHG: cleanup 2018-09-04 20:36:25 +02:00
Chris ac6bd61544 FIX: longer t55xx timings to compensate for delay of field damping, and minor adjustments. 2018-09-04 20:35:29 +02:00
Chris e12d22b6d9 FIX: 'LF Standalone modes' - Ensure that noise check is performed for any device-side processing otherwise device-side processing will see all LF signals as noise. 
From: 8bddce8096
 2018-09-04 20:32:52 +02:00
Chris 27a036b087 FIX: logic behind compiler directive is now correct 2018-09-04 20:31:12 +02:00
Iceman 701b96d7fe
Update readme.md 2018-09-03 22:45:01 +02:00
Chris 76e7603ef1 textual 2018-09-03 22:36:43 +02:00
Chris 0e3ba1c058 CHG: easier to configure compilation of standalone mode. Just swap -D directive once your new standalone mode is ready and you added your code for it 
based on a modification by @marshmellow42
 2018-09-03 22:27:18 +02:00
Chris f1d0e9db4d fix: revert back 2018-08-29 19:42:46 +02:00
Chris 42e883f67b FIX: print_result - now prints correct len. 
FIX: DOWNLOAD_BUFFER -  now with correct result logic
 2018-08-28 21:15:28 +02:00
Chris ca5b476730 FIX: 'standanlonemode colin' - mifare1ksim called with correct params (@cjbrigato) 2018-08-26 08:19:59 +02:00
Chris 2eab02e3ba CHG: 'standalone mode MattyRun' - added some comments and suggestion 2018-08-25 23:26:04 +02:00
Chris fe332a1f2b removed unneeded ramfunc attribute 2018-08-13 23:50:17 +02:00
Chris 91dea8d694 code clean. 2018-08-13 23:49:33 +02:00
Chris 5f77121694 initial commit to be in sync the-soon-defunct repo pm3rdv40. 2018-08-12 21:54:31 +02:00
Andreas Dröscher 9ba20b590a change: reduced demodulator to bare minimum 
The initial code added complexity without improving reading distance.
Thankfully the peak detection signal path has a low noise floor.
 2018-08-12 12:51:45 +02:00
Andreas Dröscher 0d0b651246 change: re-added trace log 2018-08-12 12:51:45 +02:00
Andreas Dröscher ff5b046903 change: re-added status LEDs 
- LED_A: FPGA and 13.56MHz carrier is active
- LED_B: Reading Byte
- LED_C: Writing Byte
 2018-08-12 12:41:45 +02:00
Andreas Dröscher e052fbc433 change: re-added legic write support 2018-08-12 12:41:45 +02:00
Andreas Dröscher 9d330dde87 fix: 32bit tick timer based on TC0 and TC1 
TC1 counts the number of TC0 overflows (carry bits).
In random conditions TC1 would return or stay at zero,
instead of counting up. This due to the behavior of the
reset signal.

SAM7S Series Datasheet, 33.5.6 Trigger:
Regardless of the trigger used, it will be taken into account
at the following active edge of the selected clock. This means
that the counter value can be read differently from zero just
after a trigger, especially when a low frequency signal is
selected as the clock.

The new code first prepares TC1 and asserts TC1 trigger and
then prepares TC0 and asserts TC0 trigger. The TC0 start-up
will reset TC1.
 2018-08-12 12:41:11 +02:00
Andreas Dröscher c06f0af7f3 change: switched from timestamps (us) to ticks 
GetCountUS() has a jitter of +/- 7us this is not precise
enough to keep the PRNG in sync. 1.5 * GET_TICKS on the
other hand is spot on.
 2018-08-12 09:59:48 +02:00
Andreas Dröscher e0adc976e0 change: added rx/tx coordination timestamp 2018-08-12 09:59:48 +02:00
Andreas Dröscher 7244f5825d change: legic reader tx back to bigbang 
I've tried to modulate the Legic specific pause-puls using ssc and the default
ssc clock of 105.4 kHz (bit periode of 9.4us) - previous commit. However,
the timing was not precise enough. By increasing the ssc clock this could
be circumvented, but the adventage over bitbang would be little.
 2018-08-12 09:59:48 +02:00
Andreas Dröscher 3029223158 change: legic reader now uses xcorrelation and ssc based io 
- Even tough legic tags transmit just AM using xcorrelation
   results in a significantly better signal quality.
 - Switching from bit bang to a hardware based ssc frees
   up CPU time for other tasks e.g. demodulation
 2018-08-12 09:59:48 +02:00
Andreas Dröscher c59150657c add: xcorr 211.875 kHz option 
The FPGA supported this frequency for a long time, just the ARM code
had no define to enable it.
 2018-08-12 09:59:48 +02:00
Andreas Dröscher db70ab8f7d change: remove broken legic simulator 
It will be rewritten in a later commit
 2018-08-12 09:59:48 +02:00
Andreas Dröscher 8a53137ab0 change: remove dead legic code 
This code was either disabled or never reached.
 2018-08-12 09:59:48 +02:00
Andreas Dröscher e779f06c5e change: clean up Legic interface 
I see no adventage in poluting all sources that include legicrf.h
with our internal depedencies (includes) and function names.
 2018-08-12 09:59:48 +02:00
Iceman c339035ec5
Revert "WIP: Clean Legic Reader" 2018-08-06 15:05:36 +02:00
Andreas Dröscher 058426fa17 change: added rx/tx coordination timestamp 2018-08-05 00:57:20 +02:00
Andreas Dröscher 8f797d1388 change: legic reader tx back to bigbang 
I've tried to modulate the Legic specific pause-puls using ssc and the default
ssc clock of 105.4 kHz (bit periode of 9.4us) - previous commit. However,
the timing was not precise enough. By increasing the ssc clock this could
be circumvented, but the adventage over bitbang would be little.
 2018-08-05 00:57:20 +02:00
Andreas Dröscher 78d5188922 change: legic reader now uses xcorrelation and ssc based io 
- Even tough legic tags transmit just AM using xcorrelation
   results in a significantly better signal quality.
 - Switching from bit bang to a hardware based ssc frees
   up CPU time for other tasks e.g. demodulation
 2018-08-04 23:13:17 +02:00
Andreas Dröscher d7c57dbc08 add: xcorr 211.875 kHz option 
The FPGA supported this frequency for a long time, just the ARM code
had no define to enable it.
 2018-08-04 23:13:17 +02:00
Andreas Dröscher 1adff322b1 change: remove broken legic simulator 
It will be rewritten in a later commit
 2018-08-04 23:13:17 +02:00
Andreas Dröscher 33eb2f5fa0 change: remove dead legic code 
This code was either disabled or never reached.
 2018-08-04 23:13:17 +02:00
Andreas Dröscher 37867fbf3b change: clean up Legic interface 
I see no adventage in poluting all sources that include legicrf.h
with our internal depedencies (includes) and function names.
 2018-08-04 23:13:17 +02:00
Chris bacf8aff0f add: FPC connector skeleton usart. Not working but if will be a starting point for those who might want to help out with it. 2018-07-30 09:54:44 +02:00
iceman1001 08d9d9daf9 cleaning 2018-07-29 18:20:56 +02:00
iceman1001 c082531110 fix: potential implicit type cast issue (Thanks to @drandreas for pointing it out) 2018-07-29 18:20:39 +02:00
iceman1001 506da3ff4c textual 2018-07-29 16:30:36 +02:00
iceman1001 4172ea6c19 cleanup 2018-07-28 14:26:37 +02:00
iceman1001 4d8488e14b CHG: https://github.com/Proxmark/proxmark3/pull/631 from offical repo. (piwi) 
CHG: textual adjustments
 2018-07-28 14:25:12 +02:00
Chris afeb0d0cd7 fix: removes unneeded floating point lib inclusion (@piwi) 2018-07-23 21:02:13 +02:00
Chris fff2f51cfb chg: testing to switch from WaitXX calls to SpinDelay, they seem to mess up 2018-07-06 09:10:13 +02:00
Chris 79158c7360 chg; preparing for more cmds. 2018-07-06 00:24:04 +02:00
Chris 36d774506c chg: 'sm raw' - implemented 'r' don't read reply 2018-07-05 21:10:21 +02:00
Chris 2ccbde8110 chg: 'flashmem' - adjust debugstatemnts 2018-07-05 20:29:16 +02:00
Chris fca841122f chg: 'sc reader' - hooked up atr. 2018-07-05 16:32:10 +02:00
Chris ee006c6a7b add: sc upgrade - beta test 2018-07-05 14:38:31 +02:00
Chris e7342e7402 chg: 'sc upgr' shouldnt print too much 2018-07-05 11:37:04 +02:00
Chris f70b8be5de add: 'sc' - smart card commad [rdv40] 
chg: test to read out firmware
 2018-07-05 10:48:24 +02:00