* .h include only the strict minimum for their own parsing
* this forces all files to include explicitment their needs and not count on far streched dependencies
* this helps Makefile to rebuild only the minimum
* according to this rule, most standalone .h are now gone
* big app.h is gone
* remove seldom __cplusplus, if c++ happens, everything will have to be done properly anyway
* all unrequired include were removed
* split common/ into common/ (client+arm) and common_arm/ (os+bootloader)
* bring zlib to common/
* bring stuff not really/not yet used in common back to armsrc/ or client/
* bring liblua into client/
* bring uart into client/
* move some portions of code around (dbprint, protocols,...)
* rename unused files into *_disabled.[ch] to make it explicit
* rename soft Uarts between 14a, 14b and iclass, so a standalone could use several without clash
* remove PrintAndLogDevice
* move deprecated-hid-flasher from client to tools
* Makefiles
* treat deps in armsrc/ as in client/
* client: stop on warning (-Werror), same as for armsrc/
Tested on:
* all standalone modes
* Linux
This introduces a new majoe mode, FPGA_MAJOR_MODE_OFF_LF, which should ONLY be used in sending loops for LF. Basically the PWR_LO is set HIGH in order to discharge voltage faster.
Once sending is over, the normal FPGA_MAJOR_MODE_OFF SHALL be used.
The initial code assumed phase shift modulation only. Lately,
xcorrelation is also used for load modulation. But the initial
the assumption that 11 bits are enough isn't true for load
modulation.
This change extends the registers by 2 bits and compresses the
uper bits to preserve the sensitivity on the lower end.
- Even tough legic tags transmit just AM using xcorrelation
results in a significantly better signal quality.
- Switching from bit bang to a hardware based ssc frees
up CPU time for other tasks e.g. demodulation
- fix: IQ demodulator (FPGA)
- fix: approximately align reader signal delay to tag response delay (FPGA)
- fix: remove deprecated RSSI calculation to improve decoder speed (iso14443b.c)
- fix: better approximation of signal amplitude to avoid false carrier detection (iso14443b.c)
- fix: remove initial power off in iso14443b raw command (iso14443b.c)
- add: enable tracing for iso14443b raw command (iso14443b.c)
- fix: client crashed when checking CRC for incomplete responses (iso14433b.c)
- speeding up snoop to avoid circular buffer overflow
- added some comments for better documentation
- rename functions (iso14443 -> iso14443b)
- remove unused code in hi_read_rx_xcorr.v
