* .h include only the strict minimum for their own parsing
* this forces all files to include explicitment their needs and not count on far streched dependencies
* this helps Makefile to rebuild only the minimum
* according to this rule, most standalone .h are now gone
* big app.h is gone
* remove seldom __cplusplus, if c++ happens, everything will have to be done properly anyway
* all unrequired include were removed
* split common/ into common/ (client+arm) and common_arm/ (os+bootloader)
* bring zlib to common/
* bring stuff not really/not yet used in common back to armsrc/ or client/
* bring liblua into client/
* bring uart into client/
* move some portions of code around (dbprint, protocols,...)
* rename unused files into *_disabled.[ch] to make it explicit
* rename soft Uarts between 14a, 14b and iclass, so a standalone could use several without clash
* remove PrintAndLogDevice
* move deprecated-hid-flasher from client to tools
* Makefiles
* treat deps in armsrc/ as in client/
* client: stop on warning (-Werror), same as for armsrc/
Tested on:
* all standalone modes
* Linux
Reader and card simulation have almost no common code. Moreover the sim
uses an SSP Clock at 212kHz for all timings to prevent any drifting from
the PRNG. This clock speed is not available in reader simulation mode (SSP
runs at up to 3.4MHz, and changes speed between TX and RX). For these
reasons having the code in separate files makes it significantly cleaner.
I've tried to modulate the Legic specific pause-puls using ssc and the default
ssc clock of 105.4 kHz (bit periode of 9.4us) - previous commit. However,
the timing was not precise enough. By increasing the ssc clock this could
be circumvented, but the adventage over bitbang would be little.
- Even tough legic tags transmit just AM using xcorrelation
results in a significantly better signal quality.
- Switching from bit bang to a hardware based ssc frees
up CPU time for other tasks e.g. demodulation
I've tried to modulate the Legic specific pause-puls using ssc and the default
ssc clock of 105.4 kHz (bit periode of 9.4us) - previous commit. However,
the timing was not precise enough. By increasing the ssc clock this could
be circumvented, but the adventage over bitbang would be little.
- Even tough legic tags transmit just AM using xcorrelation
results in a significantly better signal quality.
- Switching from bit bang to a hardware based ssc frees
up CPU time for other tasks e.g. demodulation
old "hf legic info" is now "hf legic reader"
old "hf legic read" is now "hf legic rdmem"
old "hf legic decode" is now "hf legic info"
ADD: new command "hf legic dump", which will autodetect tagtype and dump all mem to a binary file.
