* .h include only the strict minimum for their own parsing
* this forces all files to include explicitment their needs and not count on far streched dependencies
* this helps Makefile to rebuild only the minimum
* according to this rule, most standalone .h are now gone
* big app.h is gone
* remove seldom __cplusplus, if c++ happens, everything will have to be done properly anyway
* all unrequired include were removed
* split common/ into common/ (client+arm) and common_arm/ (os+bootloader)
* bring zlib to common/
* bring stuff not really/not yet used in common back to armsrc/ or client/
* bring liblua into client/
* bring uart into client/
* move some portions of code around (dbprint, protocols,...)
* rename unused files into *_disabled.[ch] to make it explicit
* rename soft Uarts between 14a, 14b and iclass, so a standalone could use several without clash
* remove PrintAndLogDevice
* move deprecated-hid-flasher from client to tools
* Makefiles
* treat deps in armsrc/ as in client/
* client: stop on warning (-Werror), same as for armsrc/
Tested on:
* all standalone modes
* Linux
This introduces a new majoe mode, FPGA_MAJOR_MODE_OFF_LF, which should ONLY be used in sending loops for LF. Basically the PWR_LO is set HIGH in order to discharge voltage faster.
Once sending is over, the normal FPGA_MAJOR_MODE_OFF SHALL be used.
The initial code assumed phase shift modulation only. Lately,
xcorrelation is also used for load modulation. But the initial
the assumption that 11 bits are enough isn't true for load
modulation.
This change extends the registers by 2 bits and compresses the
uper bits to preserve the sensitivity on the lower end.
- Even tough legic tags transmit just AM using xcorrelation
results in a significantly better signal quality.
- Switching from bit bang to a hardware based ssc frees
up CPU time for other tasks e.g. demodulation
- fix: IQ demodulator (FPGA)
- fix: approximately align reader signal delay to tag response delay (FPGA)
- fix: remove deprecated RSSI calculation to improve decoder speed (iso14443b.c)
- fix: better approximation of signal amplitude to avoid false carrier detection (iso14443b.c)
- fix: remove initial power off in iso14443b raw command (iso14443b.c)
- add: enable tracing for iso14443b raw command (iso14443b.c)
- fix: client crashed when checking CRC for incomplete responses (iso14433b.c)
- speeding up snoop to avoid circular buffer overflow
- added some comments for better documentation
- rename functions (iso14443 -> iso14443b)
- remove unused code in hi_read_rx_xcorr.v
- most significant bit of tag data (which happens to be the sign bit)
had been dropped when snooping (FPGA change)
- avoid trying to decode both tag and reader data when snooping (we don't
have the time to do so).
This is a new LF edge detection algorithm for the FPGA.
- It uses a low-pass IIR filter to clean the signal
(see https://fail0verflow.com/blog/2014/proxmark3-fpga-iir-filter.html)
- The algorithm is able to detect consecutive peaks in the same
direction
- It uses an envelope follower to dynamically adjust the peak thresholds
- The main threshold used in the envelope follower can be set from the ARM side
fpga/lf_edge_detect.v,
fpga/lp20khz_1MSa_iir_filter.v,
fpga/min_max_tracker.v: New file.
fpga/lo_edge_detect.v, fpga/fpga_lf.v: Modify accordingly.
armsrc/apps.h (FPGA_CMD_SET_USER_BYTE1,
FPGA_CMD_SET_EDGE_DETECT_THRESHOLD): New FPGA command.
fpga/fpga_lf.v: Modify accordingly/Add a 8bit user register.
fpga/fpga_lf.bit: Update accordingly.
fpga/tests: New directory for testbenches
fpga/tests/Makefile: New file. It compiles the testbenches
and runs all the tests by default (comparing with the golden output)
fpga/tests/tb_lp20khz_1MSa_iir_filter.v,
fpga/tests/tb_min_max_tracker.v,
fpga/tests/tb_lf_edge_detect.v: New testbenches
fpga/tests/plot_edgedetect.py: New script to plot the results from
the edge detection tests.
fpga/tests/tb_data: New directory for data and golden outputs
- fixed a circular buffer rollover bug in iso14443a.c
- fixed 7 Byte UID handling in hf mf sniff
- fixed "cannot append" error in hf mf sniff d
- fixed hint on mfkey32 in hf mf sim x
- fixed hf mf sniff sometimes showing rogue data from previous calloc
- improve snooping/sniffing by syncing modulation detector window with reader signal (hi_iso14443a.v)
- code cleanup of hi_iso14443a.v
- enhanced tracing: hf 14a list now shows meaningful timing information. With new option f it also shows the frame delay times (fdt)
- small fix for hf 14b list - it used to run into the trace trailer
- hf 14a sim now obeys iso14443 timing (fdt of 1172 or 1234 resp.)
Note: you need to flash FPGA as well.
More details in http://www.proxmark.org/forum/viewtopic.php?pid=9721#p9721
Retire rbt2c.pl, instead use objcopy to directly convert the .bit file into an .o that can be linked with the flash image
Rename armsrc/fpga.c to armsrc/fpgaloader.c (since there is now a new fpga.o, created from fpga.bit)
Remove fpgaimg.c from subversion, add fpga.bit
Instead of creating fpgaimage.elf and osimage.elf separately, now create a joined fullimage.elf
first (obsoleting ldscript-full), then extract only the fpga and os sections with objcopy
(This creates unspecific warnings about an empty segment, need to investigate)
Implement a rudimentary .bit parser in the firmware, use that to locate the bitstream in the new
fpgaimage (which is just a plain copy of the fpga.bit file) and send it to the FPGA
The code will check the format that's in flash and fall back to the legacy format
It is identical to the popular 20081211, with the doob addition (20090301), a
linux client, and two additional commands for LF analysis. Let me know if
you find issues here!
